GDB: debug ports: dcons GDB: current port: dcons KDB: debugger backends: ddb gdb KDB: current backend: ddb SMAP type=01 base=0000000000000000 len=0000000000095400 SMAP type=02 base=0000000000095400 len=000000000000ac00 SMAP type=02 base=00000000000e0000 len=0000000000020000 SMAP type=01 base=0000000000100000 len=00000000cf2af000 SMAP type=04 base=00000000cf3af000 len=0000000000083000 SMAP type=02 base=00000000cf432000 len=0000000000120000 SMAP type=04 base=00000000cf552000 len=0000000000008000 SMAP type=02 base=00000000cf55a000 len=00000000000ff000 SMAP type=03 base=00000000cf659000 len=0000000000007000 SMAP type=04 base=00000000cf660000 len=000000000000a000 SMAP type=02 base=00000000cf66a000 len=0000000000022000 SMAP type=04 base=00000000cf68c000 len=0000000000006000 SMAP type=01 base=00000000cf692000 len=000000000016e000 SMAP type=01 base=0000000100000000 len=0000000130000000 SMAP type=02 base=00000000fed1c000 len=0000000000004000 SMAP type=02 base=00000000ff000000 len=0000000001000000 Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-CURRENT #0: Wed Mar 10 18:26:55 WST 2010 root@direwolf:/usr/obj/usr/src/sys/DIREWOLF amd64 WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8105d000. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2833304949 Hz CPU: Intel(R) Core(TM)2 Quad CPU Q9505 @ 2.83GHz (2833.30-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x1067a Stepping = 10 Features=0xbfebfbff Features2=0x408e3fd AMD Features=0x20100800 AMD Features2=0x1 TSC: P-state invariant real memory = 8589934592 (8192 MB) Physical memory chunk(s): 0x0000000000001000 - 0x0000000000041fff, 266240 bytes (65 pages) 0x0000000000052000 - 0x0000000000091fff, 262144 bytes (64 pages) 0x0000000001090000 - 0x00000000cf3aefff, 3459379200 bytes (844575 pages) 0x00000000cf692000 - 0x00000000cf7fffff, 1499136 bytes (366 pages) 0x0000000100000000 - 0x000000021f8b3fff, 4824186880 bytes (1177780 pages) avail memory = 8242503680 (7860 MB) MPTable: INTR: Adding local APIC 1 as a target INTR: Adding local APIC 2 as a target INTR: Adding local APIC 3 as a target FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ULE: setup cpu 0 ULE: setup cpu 1 ULE: setup cpu 2 ULE: setup cpu 3 ioapic0: Assuming intbase of 0 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 9 trigger: level lapic: Routing ExtINT -> LINT0 lapic: Routing NMI -> LINT1 ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 wlan: <802.11 Link Layer> kbd: new array size 4 kbd1 at kbdmux0 mem: nfslock: pseudo-device null: random: io: hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 ACPI: RSDP 0xf03c0 00024 (v2 INTEL) ACPI: XSDT 0xcf65ee18 00054 (v1 INTEL DP45SG 00000117 MSFT 00010013) ACPI Warning: Incorrect checksum in table [XSDT] - 0xA0, should be 0xC9 (20100304/tbutils-354) ACPI: FACP 0xcf65dd98 000F4 (v4 INTEL DP45SG 00000117 MSFT 00010013) ACPI Warning: 32/64X FACS address mismatch in FADT - 0xCF661F40/0x 0CF667E40, using 32 (20100304/tbfadt-586) ACPI: DSDT 0xcf659018 03D83 (v1 INTEL DP45SG 00000117 INTL 20051117) ACPI: FACS 0xcf661f40 00040 ACPI: APIC 0xcf65df18 0006C (v2 INTEL DP45SG 00000117 MSFT 00010013) ACPI: MCFG 0xcf668d98 0003C (v1 INTEL DP45SG 00000117 MSFT 00000097) ACPI: HPET 0xcf668d18 00038 (v1 INTEL DP45SG 00000117 AMI. 00000003) ACPI: ASPT 0xcf668b98 0002C (v2 INTEL PerfTune 00000117 AMI 00000003) ACPI: WDTT 0xcf661918 002CC (v1 INTEL DP45SG 00000117 AMI 00000003) acpi0: on motherboard PCIe: Memory Mapped configuration base @ 0xf0000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] ACPI: Executed 1 blocks of module-level executable AML code acpi0: Power Button (fixed) AcpiOsDerivePciId: \_SB_.PCI0.SBRG.PIX0 -> bus 0 dev 31 func 0 ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: on acpi0 cpu1: on acpi0 cpu2: on acpi0 cpu3: on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 3 N 0 3 4 5 6 10 11 12 14 15 Validation 0 3 N 0 3 4 5 6 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15 Validation 0 10 N 0 3 4 5 6 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 5 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 7 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 4 hz: 14318180 opts: legacy_route 64-bit Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: port 0xcf8-0xcff on acpi0 ACPI: Found matching pin for 0.1.INTA at func 0: 11 ACPI: Found matching pin for 0.31.INTB at func 2: 10 ACPI: Found matching pin for 0.31.INTC at func 3: 3 ACPI: Found matching pin for 0.27.INTA at func 0: 7 ACPI: Found matching pin for 0.25.INTA at func 0: 10 ACPI: Found matching pin for 0.29.INTA at func 0: 11 ACPI: Found matching pin for 0.29.INTB at func 1: 10 ACPI: Found matching pin for 0.29.INTC at func 2: 3 ACPI: Found matching pin for 0.26.INTA at func 0: 11 ACPI: Found matching pin for 0.26.INTB at func 1: 5 ACPI: Found matching pin for 0.26.INTC at func 2: 3 pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x2e20, revid=0x03 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2e21, revid=0x03 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.1.INTA (src \_SB_.LNKA:0) ioapic0: Changing trigger for pin 11 to level ioapic0: Changing polarity for pin 11 to low pcib0: slot 1 INTA routed to irq 11 via \_SB_.LNKA found-> vendor=0x8086, dev=0x10cd, revid=0x00 domain=0, bus=0, slot=25, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xe0200000, size 17, enabled map[14]: type Memory, range 32, base 0xe0224000, size 12, enabled map[18]: type I/O Port, range 32, base 0xf100, size 5, enabled pcib0: matched entry for 0.25.INTA (src \_SB_.LNKE:0) ioapic0: Changing trigger for pin 10 to level ioapic0: Changing polarity for pin 10 to low pcib0: slot 25 INTA routed to irq 10 via \_SB_.LNKE found-> vendor=0x8086, dev=0x3a37, revid=0x00 domain=0, bus=0, slot=26, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0xf0e0, size 5, enabled pcib0: matched entry for 0.26.INTA (src \_SB_.LNKA:0) pcib0: slot 26 INTA routed to irq 11 via \_SB_.LNKA found-> vendor=0x8086, dev=0x3a38, revid=0x00 domain=0, bus=0, slot=26, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[20]: type I/O Port, range 32, base 0xf0c0, size 5, enabled pcib0: matched entry for 0.26.INTB (src \_SB_.LNKF:0) ioapic0: Changing trigger for pin 5 to level ioapic0: Changing polarity for pin 5 to low pcib0: slot 26 INTB routed to irq 5 via \_SB_.LNKF found-> vendor=0x8086, dev=0x3a39, revid=0x00 domain=0, bus=0, slot=26, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=3 map[20]: type I/O Port, range 32, base 0xf0a0, size 5, enabled pcib0: matched entry for 0.26.INTC (src \_SB_.LNKC:0) ioapic0: Changing trigger for pin 3 to level ioapic0: Changing polarity for pin 3 to low pcib0: slot 26 INTC routed to irq 3 via \_SB_.LNKC found-> vendor=0x8086, dev=0x3a3c, revid=0x00 domain=0, bus=0, slot=26, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=3 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xe0225c00, size 10, enabled pcib0: matched entry for 0.26.INTC (src \_SB_.LNKC:0) pcib0: slot 26 INTC routed to irq 3 via \_SB_.LNKC ehci early: SMM active, request owner change ehci early: SMM does not respond found-> vendor=0x8086, dev=0x3a3e, revid=0x00 domain=0, bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xe0220000, size 14, enabled pcib0: matched entry for 0.27.INTA (src \_SB_.LNKG:0) ioapic0: Changing trigger for pin 7 to level ioapic0: Changing polarity for pin 7 to low pcib0: slot 27 INTA routed to irq 7 via \_SB_.LNKG found-> vendor=0x8086, dev=0x3a34, revid=0x00 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0xf080, size 5, enabled pcib0: matched entry for 0.29.INTA (src \_SB_.LNKH:0) pcib0: slot 29 INTA routed to irq 11 via \_SB_.LNKH found-> vendor=0x8086, dev=0x3a35, revid=0x00 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type I/O Port, range 32, base 0xf060, size 5, enabled pcib0: matched entry for 0.29.INTB (src \_SB_.LNKD:0) pcib0: slot 29 INTB routed to irq 10 via \_SB_.LNKD found-> vendor=0x8086, dev=0x3a36, revid=0x00 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=3 map[20]: type I/O Port, range 32, base 0xf040, size 5, enabled pcib0: matched entry for 0.29.INTC (src \_SB_.LNKC:0) pcib0: slot 29 INTC routed to irq 3 via \_SB_.LNKC found-> vendor=0x8086, dev=0x3a3a, revid=0x00 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xe0225800, size 10, enabled pcib0: matched entry for 0.29.INTA (src \_SB_.LNKH:0) pcib0: slot 29 INTA routed to irq 11 via \_SB_.LNKH ehci early: SMM active, request owner change ehci early: SMM does not respond found-> vendor=0x8086, dev=0x244e, revid=0x90 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3a16, revid=0x00 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2822, revid=0x00 domain=0, bus=0, slot=31, func=2 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 16 messages map[10]: type I/O Port, range 32, base 0xf150, size 3, enabled map[14]: type I/O Port, range 32, base 0xf140, size 2, enabled map[18]: type I/O Port, range 32, base 0xf130, size 3, enabled map[1c]: type I/O Port, range 32, base 0xf120, size 2, enabled map[20]: type I/O Port, range 32, base 0xf020, size 5, enabled map[24]: type Memory, range 32, base 0xe0225000, size 11, enabled pcib0: matched entry for 0.31.INTB (src \_SB_.LNKD:0) pcib0: slot 31 INTB routed to irq 10 via \_SB_.LNKD found-> vendor=0x8086, dev=0x3a30, revid=0x00 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=3 map[10]: type Memory, range 64, base 0xe0226000, size 8, enabled map[20]: type I/O Port, range 32, base 0xf000, size 5, enabled pcib0: matched entry for 0.31.INTC (src \_SB_.LNKC:0) pcib0: slot 31 INTC routed to irq 3 via \_SB_.LNKC pcib1: irq 11 at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xefff pcib1: memory decode 0xd0000000-0xe00fffff pcib1: no prefetched decode pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.P0P1 - AE_NOT_FOUND pci1: on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x1002, dev=0x7280, revid=0x00 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled pcib1: requested memory range 0xd0000000-0xdfffffff: good map[18]: type Memory, range 64, base 0xe0030000, size 16, enabled pcib1: requested memory range 0xe0030000-0xe003ffff: good map[20]: type I/O Port, range 32, base 0xe000, size 8, enabled pcib1: requested I/O range 0xe000-0xe0ff: in range pcib0: matched entry for 0.1.INTA (src \_SB_.LNKA:0) pcib0: slot 1 INTA routed to irq 11 via \_SB_.LNKA pcib1: slot 0 INTA is routed to irq 11 found-> vendor=0x1002, dev=0x72a0, revid=0x00 domain=0, bus=1, slot=0, func=1 class=03-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 64, base 0xe0020000, size 16, enabled pcib1: requested memory range 0xe0020000-0xe002ffff: good vgapci0: port 0xe000-0xe0ff mem 0xd0000000-0xdfffffff,0xe0030000-0xe003ffff irq 11 at device 0.0 on pci1 vgapci1: mem 0xe0020000-0xe002ffff at device 0.1 on pci1 em0: port 0xf100-0xf11f mem 0xe0200000-0xe021ffff,0xe0224000-0xe0224fff irq 10 at device 25.0 on pci0 em0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 49 em0: using IRQ 256 for MSI em0: Using MSI interrupt em0: [FILTER] em0: bpf attached em0: Ethernet address: 00:1c:c0:8c:09:d9 uhci0: port 0xf0e0-0xf0ff irq 11 at device 26.0 on pci0 ioapic0: routing intpin 11 (ISA IRQ 11) to lapic 0 vector 50 uhci0: [MPSAFE] uhci0: [ITHREAD] uhci0: LegSup = 0x3f00 usbus0: on uhci0 uhci1: port 0xf0c0-0xf0df irq 5 at device 26.1 on pci0 ioapic0: routing intpin 5 (ISA IRQ 5) to lapic 0 vector 51 uhci1: [MPSAFE] uhci1: [ITHREAD] uhci1: LegSup = 0x2f00 usbus1: on uhci1 uhci2: port 0xf0a0-0xf0bf irq 3 at device 26.2 on pci0 ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 52 uhci2: [MPSAFE] uhci2: [ITHREAD] uhci2: LegSup = 0x2f00 usbus2: on uhci2 ehci0: mem 0xe0225c00-0xe0225fff irq 3 at device 26.7 on pci0 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus3: waiting for BIOS to give up control usbus3: timed out waiting for BIOS usbus3: EHCI version 1.0 usbus3: on ehci0 pci0: at device 27.0 (no driver attached) uhci3: port 0xf080-0xf09f irq 11 at device 29.0 on pci0 uhci3: [MPSAFE] uhci3: [ITHREAD] uhci3: LegSup = 0x2f00 usbus4: on uhci3 uhci4: port 0xf060-0xf07f irq 10 at device 29.1 on pci0 ioapic0: routing intpin 10 (ISA IRQ 10) to lapic 0 vector 53 uhci4: [MPSAFE] uhci4: [ITHREAD] uhci4: LegSup = 0x2f00 usbus5: on uhci4 uhci5: port 0xf040-0xf05f irq 3 at device 29.2 on pci0 uhci5: [MPSAFE] uhci5: [ITHREAD] uhci5: LegSup = 0x2f00 usbus6: on uhci5 ehci1: mem 0xe0225800-0xe0225bff irq 11 at device 29.7 on pci0 ehci1: [MPSAFE] ehci1: [ITHREAD] usbus7: waiting for BIOS to give up control usbus7: timed out waiting for BIOS usbus7: EHCI version 1.0 usbus7: on ehci1 pcib2: at device 30.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xd000-0xdfff pcib2: memory decode 0xe0100000-0xe01fffff pcib2: no prefetched decode pcib2: Subtractively decoded bridge. pci2: on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x11c1, dev=0x5811, revid=0x70 domain=0, bus=2, slot=0, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x18 (6000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xe0100000, size 12, enabled pcib2: requested memory range 0xe0100000-0xe0100fff: good pcib2: slot 0 INTA routed to irq 19 found-> vendor=0x10ec, dev=0x8139, revid=0x10 domain=0, bus=2, slot=2, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xd000, size 8, enabled pcib2: requested I/O range 0xd000-0xd0ff: in range map[14]: type Memory, range 32, base 0xe0101000, size 8, enabled pcib2: requested memory range 0xe0101000-0xe01010ff: good pcib2: slot 2 INTA routed to irq 20 fwohci0: mem 0xe0100000-0xe0100fff irq 19 at device 0.0 on pci2 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 54 fwohci0: [MPSAFE] fwohci0: [ITHREAD] fwohci0: OHCI version 1.0 (ROM=0) fwohci0: No. of Isochronous channels is 8. fwo[dcons disconnected (get ptr failed)] [dcons disconnected (read header failed)] [dcons connected] hci0: EUI64 00:90:27:00:02:2b:34:ed fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:90:27:2b:34:ed fwe0: bpf attached fwe0: Ethernet address: 02:90:27:2b:34:ed fwip0: on firewire0 fwip0: bpf attached fwip0: Firewire address: 00:90:27:00:02:2b:34:ed @ 0xfffe00000000, S400, maxrec 2048 sbp0: on firewire0 dcons_crom0: on firewire0 dcons_crom0: bus_addr 0x42000 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=0x00000001, SelfID Count=2, CYCLEMASTER mode rl0: port 0xd000-0xd0ff mem 0xe0101000-0xe01010ff irq 20 at device 2.0 on pci2 miibus0: on rl0 rlphy0: PHY 0 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: bpf attached rl0: Ethernet address: 00:0e:2e:d4:2a:bb ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 55 rl0: [MPSAFE] rl0: [ITHREAD] isab0: at device 31.0 on pci0 isa0: on isab0 ahci0: port 0xf150-0xf157,0xf140-0xf143,0xf130-0xf137,0xf120-0xf123,0xf020-0xf03f mem 0xe0225000-0xe02257ff irq 10 at device 31.2 on pci0 ahci0: attempting to allocate 1 MSI vectors (16 supported) msi: routing MSI IRQ 257 to local APIC 0 vector 64 ahci0: using IRQ 257 for MSI ahci0: [MPSAFE] ahci0: [ITHREAD] ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported ahci0: Caps: 64bit NCQ SNTF AL CLO 3Gbps PMD SSC PSC 32cmd CCC EM eSATA 6ports ahci0: Caps2: ahci0: EM Caps: ALHD XMT SMB LED ahcich0: at channel 0 on ahci0 ahcich0: [MPSAFE] ahcich0: [ITHREAD] ahcich0: Caps: ahcich1: at channel 1 on ahci0 ahcich1: [MPSAFE] ahcich1: [ITHREAD] ahcich1: Caps: ahcich2: at channel 2 on ahci0 ahcich2: [MPSAFE] ahcich2: [ITHREAD] ahcich2: Caps: ahcich3: at channel 3 on ahci0 ahcich3: [MPSAFE] ahcich3: [ITHREAD] ahcich3: Caps: HPCP ESP ahcich4: at channel 4 on ahci0 ahcich4: [MPSAFE] ahcich4: [ITHREAD] ahcich4: Caps: ahcich5: at channel 5 on ahci0 ahcich5: [MPSAFE] ahcich5: [ITHREAD] ahcich5: Caps: pci0: at device 31.3 (no driver attached) acpi_button0: on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 56 uart0: [FILTER] uart0: fast interrupt uart0: console (115200,n,8,1) atrtc0: port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) acpi0: wakeup code va 0xffffff80e9f1d000 pa 0x4000 ex_isa_identify() isa_probe_children: disabling PnP devices atrtc: atrtc0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: at iomem 0xcf800-0xd5fff,0xd6000-0xd6fff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 57 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0: failed to probe at irq 7 on isa0 uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0 uart1: [FILTER] uart1: fast interrupt isa_probe_children: probing PnP devices est0: on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 616482406004824 device_attach: est0 attach returned 6 p4tcc0: on cpu0 est1: on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 616482406004824 device_attach: est1 attach returned 6 p4tcc1: on cpu1 est2: on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 616482406004824 device_attach: est2 attach returned 6 p4tcc2: on cpu2 est3: on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 616482406004824 device_attach: est3 attach returned 6 p4tcc3: on cpu3 Device configuration finished. Reducing kern.maxvnodes 511876 -> 100000 procfs registered lapic: Divisor 2, Frequency 166665000 Hz ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 58 Timecounter "TSC" frequency 2833304949 Hz quality -100 Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: firewire0: 2 nodes, maxhop <= 1 cable IRM irm(1) (me) firewire0: bus manager 1 bpf attached hptrr: no controller detected. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ugen2.1: at usbus2 uhub2: on usbus2 ugen3.1: at usbus3 uhub3: on usbus3 ugen4.1: at usbus4 uhub4: on usbus4 ugen5.1: at usbus5 uhub5: on usbus5 ugen6.1: at usbus6 uhub6: on usbus6 usbus7: 480Mbps High Speed USB v2.0 ahcich0: AHCI reset... ugen7.1: at usbus7 uhub7: on usbus7 ahcich0: SATA connect time=0ms status=00000123 ahcich0: ready wait time=1ms ahcich0: AHCI reset done: device found (aprobe0:ahcich0:0:0:0): SIGNATURE: 0000 ahcich1: AHCI reset... ahcich1: SATA connect time=0ms status=00000123 ahcich1: ready wait time=1ms ahcich1: AHCI reset done: device found (aprobe0:ahcich1:0:0:0): SIGNATURE: 0000 ahcich2: AHCI reset... ahcich2: SATA connect time=0ms status=00000113 firewire0: New S400 device ID:00902700022b34b9 ahcich2: ready wait time=175ms ahcich2: AHCI reset done: device found uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered (aprobe0:ahcich2:0:0:0): SIGNATURE: 0000 ahcich3: AHCI reset... ahcich3: SATA connect timeout status=00000000 ahcich3: AHCI reset done: phy reset found no device ahcich4: AHCI reset... ahcich4: SATA connect time=0ms status=00000123 ahcich4: ready wait time=1ms ahcich4: AHCI reset done: device found (aprobe0:ahcich4:0:0:0): SIGNATURE: 0000 ahcich5: AHCI reset... ahcich5: SATA connect time=0ms status=00000113 ahcich5: ready wait time=1ms ahcich5: AHCI reset done: device found (aprobe0:ahcich5:0:0:0): SIGNATURE: eb14 uhub3: 6 ports with 6 removable, self powered uhub7: 6 ports with 6 removable, self powered (probe0:sbp0:0:0:0): Error 22, Unretryable error (probe3:sbp0:0:3:0): Error 22, Unretryable error (probe4:sbp0:0:4:0): Error 22, Unretryable error (probe1:sbp0:0:1:0): Error 22, Unretryable error (probe2:sbp0:0:2:0): Error 22, Unretryable error (probe5:sbp0:0:5:0): Error 22, Unretryable error (probe6:sbp0:0:6:0): Error 22, Unretryable error GEOM: new disk cd0 (cd0:ahcich5:0:0:0): SCSI status error (cd0:ahcich5:0:0:0): Requesting SCSI sense data (cd0:ahcich5:0:0:0): SCSI status error (cd0:ahcich5:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:ahcich5:0:0:0): CAM status: SCSI Status Error (cd0:ahcich5:0:0:0): SCSI status: Check Condition (cd0:ahcich5:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed) (cd0:ahcich5:0:0:0): Error 6, Unretryable error cd0 at ahcich5 bus 0 scbus6 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 ada0: ATA-7 SATA 2.x device ada0: Serial Number V6003L6G ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 286188MB (586114704 512 byte sectors: 16H 63S/T 16383C) ada1 at ahcich1 bus 0 scbus2 target 0 lun 0 ada1: ATA-8 SATA 2.x device ada1: Serial Number S20BJ1LZ102899 ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) ada2 at ahcich2 bus 0 scbus3 target 0 lun 0 ada2: ATA-6 SATA 1.x device ada2: Serial Number 3JT19PDK ada2: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) ada2: 114473MB (234441648 512 byte sectors: 16H 63S/T 16383C) ada3 at ahcich4 bus 0 scbus5 target 0 lun 0 ada3: ATA-8 SATA 2.x device ada3: Serial Number S20BJ1LZ102898 ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) pass0 at ahcich0 bus 0 scbus1 target 0 lun 0 pass0: ATA-7 SATA 2.x device pass0: Serial Number V6003L6G pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) pass0: Command Queueing enabled pass1 at ahcich1 bus 0 scbus2 target 0 lun 0 pass1: ATA-8 SATA 2.x device pass1: Serial Number S20BJ1LZ102899 pass1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) pass1: Command Queueing enabled pass2 at ahcich2 bus 0 scbus3 target 0 lun 0 pass2: ATA-6 SATA 1.x device pass2: Serial Number 3JT19PDK pass2: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) pass3 at ahcich4 bus 0 scbus5 target 0 lun 0 pass3: ATA-8 SATA 2.x device pass3: Serial Number S20BJ1LZ102898 pass3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) pass3: Command Queueing enabled pass4 at ahcich5 bus 0 scbus6 target 0 lun 0 pass4: Removable CD-ROM SCSI-0 device pass4: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 SMP: AP CPU #3 Launched! cpu3 AP: ID: 0x03000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 SMP: AP CPU #2 Launched! cpu2 AP: ID: 0x02000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 ifolaopwitca0b:l er oculteiannge ri nsttpairnt e3d (ISA IRQ 3) to lapic 1 vector 48 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 2 vector 48 ioapic0: routing intpin 5 (ISA IRQ 5) to lapic 3 vector 48 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 49 ioapic0: routing intpin 10 (ISA IRQ 10) to lapic 2 vector 49 ioapic0: routing intpin 11 (ISA IRQ 11) to lapic 3 vector 49 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 1 vector 50 msi: Assigning MSI IRQ 256 to local APIC 2 vector 50 msi: Assigning MSI IRQ 257 to local APIC 3 vector 50 WARNING: WITNESS option enabled, expect reduced performance. usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored) usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored) usb_alloc_device: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT usb_alloc_device: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_req_re_enumerate: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT usbd_req_re_enumerate: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_req_re_enumerate: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT ugen0.2: <(null)> at usbus0 (disconnected) uhub_reattach_port: could not allocate new device usbd_req_re_enumerate: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT ugen1.2: <(null)> at usbus1 (disconnected) uhub_reattach_port: could not allocate new device