Disk /dev/sda: 625142448 sectors, 298.1 GiB
Disk identifier (GUID): 960D04FD-A829-4C83-9BA8-DB0F42F33B63
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 625142414
Total free space is 9669 sectors (4.7 MiB)
Number Start (sector) End (sector) Size Code Name
1 2048 206847 100.0 MiB 0700 Linux/Windows data
2 206848 117188607 55.8 GiB 0700 Linux/Windows data
5 117189464 457816589 162.4 GiB 0700 Linux/Windows data
6 457818638 466207245 4.0 GiB 8200 Linux swap
7 466209294 466414093 100.0 MiB 0700 Linux/Windows data
8 466416142 625141759 75.7 GiB 0700 Linux/Windows data
hdd is in SATA/AHCI mode
6 - swap
7 - boot
8 - root
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubu
ntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
[ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009e800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007fee0000 (usable)
[ 0.000000] modified: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
[ 0.000000] modified: 000000007fee3000 - 000000007fef0000 (ACPI data)
[ 0.000000] modified: 000000007fef0000 - 000000007ff00000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 37859000 - 37fef2a2
[ 0.000000] Allocated new RAMDISK: 008de000 - 010742a2
[ 0.000000] Move RAMDISK from 0000000037859000 - 0000000037fef2a1 to 008de000 - 010742a1
[ 0.000000] ACPI: RSDP 000f6b20 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 7fee3040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 7fee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 7fee3180 04B32 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 7fee0000 00040
[ 0.000000] ACPI: HPET 7fee7e00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 7fee7e80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 7fee7d00 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 7fee7f00 0015C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.000000] ACPI: SSDT 7fee8390 00324 (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1158MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[ 0.000000] #4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000]
[ 0.000000] #5 [00008da000 - 00008dd0f6] BRK ==> [00008da000 - 00008dd0f6]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00008de000 - 00010742a2] NEW RAMDISK ==> [00008de000 - 00010742a2]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00f5130] f5130
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007fee0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007fee0
[ 0.000000] On node 0 totalpages: 523898
[ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1076000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3962 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2318 pages used for memmap
[ 0.000000] HighMem zone: 294356 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:70100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36024 r0 d21320 u1048576
[ 0.000000] pcpu-alloc: s36024 r0 d21320 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519804
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-21-generic root=UUID=0d8b8145-cdb3-490b-8e3d-198af6242853 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10480000 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007fee0)
[ 0.000000] Memory: 2050900k/2096000k available (4673k kernel code, 43540k reserved, 2122k data, 656k init, 1186696k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB)
[ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2666.348 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.69 BogoMIPS (lpj=10665392)
[ 0.004017] Security Framework initialized
[ 0.004033] AppArmor: AppArmor initialized
[ 0.004038] Mount-cache hash table entries: 512
[ 0.004135] Initializing cgroup subsys ns
[ 0.004138] Initializing cgroup subsys cpuacct
[ 0.004142] Initializing cgroup subsys memory
[ 0.004147] Initializing cgroup subsys devices
[ 0.004149] Initializing cgroup subsys freezer
[ 0.004151] Initializing cgroup subsys net_cls
[ 0.004167] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004169] CPU: L2 cache: 4096K
[ 0.004172] CPU: Physical Processor ID: 0
[ 0.004173] CPU: Processor Core ID: 0
[ 0.004176] mce: CPU supports 6 MCE banks
[ 0.004183] CPU0: Thermal monitoring enabled (TM2)
[ 0.004185] using mwait in idle threads.
[ 0.004190] Performance Events: Core2 events, Intel PMU driver.
[ 0.004197] ... version: 2
[ 0.004198] ... bit width: 40
[ 0.004200] ... generic registers: 2
[ 0.004201] ... value mask: 000000ffffffffff
[ 0.004203] ... max period: 000000007fffffff
[ 0.004204] ... fixed-purpose events: 3
[ 0.004205] ... event mask: 0000000700000003
[ 0.004209] Checking 'hlt' instruction... OK.
[ 0.022167] ACPI: Core revision 20090903
[ 0.028020] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.028027] ftrace: allocating 21771 entries in 43 pages
[ 0.032040] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.032339] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072572] CPU0: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz stepping 0b
[ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 4096K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.160039] CPU1: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz stepping 0b
[ 0.160048] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.164015] Brought up 2 CPUs
[ 0.164017] Total of 2 processors activated (10665.99 BogoMIPS).
[ 0.164538] CPU0 attaching sched-domain:
[ 0.164541] domain 0: span 0-1 level MC
[ 0.164543] groups: 0 1
[ 0.164548] CPU1 attaching sched-domain:
[ 0.164550] domain 0: span 0-1 level MC
[ 0.164551] groups: 1 0
[ 0.164631] devtmpfs: initialized
[ 0.164631] regulator: core version 0.5
[ 0.164631] Time: 20:40:09 Date: 09/05/10
[ 0.164631] NET: Registered protocol family 16
[ 0.164631] Trying to unpack rootfs image as initramfs...
[ 0.164631] EISA bus registered
[ 0.164631] ACPI: bus type pci registered
[ 0.164631] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.164631] PCI: MCFG area at f0000000 reserved in E820
[ 0.164631] PCI: Using MMCONFIG for extended config space
[ 0.164631] PCI: Using configuration type 1 for base access
[ 0.168078] bio: create slab <bio-0> at 0
[ 0.168643] ACPI: EC: Look up EC in DSDT
[ 0.173171] ACPI: Interpreter enabled
[ 0.173186] ACPI: (supports S0 S3 S4 S5)
[ 0.173204] ACPI: Using IOAPIC for interrupt routing
[ 0.177426] ACPI: No dock devices found.
[ 0.177501] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.177587] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.177589] pci 0000:00:01.0: PME# disabled
[ 0.177651] pci 0000:00:1a.0: reg 20 io port: [0xe100-0xe11f]
[ 0.177711] pci 0000:00:1a.1: reg 20 io port: [0xe200-0xe21f]
[ 0.177771] pci 0000:00:1a.2: reg 20 io port: [0xe000-0xe01f]
[ 0.177822] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfa205000-0xfa2053ff]
[ 0.177892] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfa200000-0xfa203fff]
[ 0.177928] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.177931] pci 0000:00:1b.0: PME# disabled
[ 0.177984] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.177988] pci 0000:00:1c.0: PME# disabled
[ 0.178046] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.178049] pci 0000:00:1c.4: PME# disabled
[ 0.178103] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.178107] pci 0000:00:1c.5: PME# disabled
[ 0.178153] pci 0000:00:1d.0: reg 20 io port: [0xe300-0xe31f]
[ 0.178213] pci 0000:00:1d.1: reg 20 io port: [0xe400-0xe41f]
[ 0.178275] pci 0000:00:1d.2: reg 20 io port: [0xe500-0xe51f]
[ 0.178326] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfa204000-0xfa2043ff]
[ 0.178468] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.178472] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.178475] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.178478] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.178535] pci 0000:00:1f.2: reg 10 io port: [0xe600-0xe607]
.008000] CPU: Processor Core ID: 1
[ 0.178540] pci 0000:00:1f.2: reg 14 io port: [0xe700-0xe703]
[ 0.178545] pci 0000:00:1f.2: reg 18 io port: [0xe800-0xe807]
[ 0.178550] pci 0000:00:1f.2: reg 1c io port: [0xe900-0xe903]
[ 0.178555] pci 0000:00:1f.2: reg 20 io port: [0xea00-0xea1f]
[ 0.178560] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfa206000-0xfa2067ff]
[ 0.178587] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.178590] pci 0000:00:1f.2: PME# disabled
[ 0.178614] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfa207000-0xfa2070ff]
[ 0.178626] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[ 0.178666] pci 0000:01:00.0: reg 10 32bit mmio: [0xf6000000-0xf6ffffff]
[ 0.178674] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.178682] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf4000000-0xf5ffffff]
[ 0.178687] pci 0000:01:00.0: reg 24 io port: [0xb000-0xb07f]
[ 0.178692] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x07ffff]
[ 0.178749] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff]
[ 0.178752] pci 0000:00:01.0: bridge 32bit mmio: [0xf4000000-0xf7ffffff]
[ 0.178755] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.178789] pci 0000:00:1c.0: bridge io port: [0xa000-0xafff]
[ 0.178876] pci 0000:03:00.0: reg 24 32bit mmio: [0xfa000000-0xfa001fff]
[ 0.178912] pci 0000:03:00.0: PME# supported from D3hot
[ 0.178917] pci 0000:03:00.0: PME# disabled
[ 0.178966] pci 0000:03:00.1: reg 10 io port: [0xc000-0xc007]
[ 0.178974] pci 0000:03:00.1: reg 14 io port: [0xc100-0xc103]
[ 0.178982] pci 0000:03:00.1: reg 18 io port: [0xc200-0xc207]
[ 0.178990] pci 0000:03:00.1: reg 1c io port: [0xc300-0xc303]
[ 0.178999] pci 0000:03:00.1: reg 20 io port: [0xc400-0xc40f]
[ 0.179081] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff]
[ 0.179084] pci 0000:00:1c.4: bridge 32bit mmio: [0xfa000000-0xfa0fffff]
[ 0.179139] pci 0000:04:00.0: reg 10 io port: [0xd000-0xd0ff]
[ 0.179160] pci 0000:04:00.0: reg 18 64bit mmio: [0xf9000000-0xf9000fff]
[ 0.179180] pci 0000:04:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.179224] pci 0000:04:00.0: supports D1 D2
[ 0.179226] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.179230] pci 0000:04:00.0: PME# disabled
[ 0.179277] pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff]
[ 0.179281] pci 0000:00:1c.5: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
[ 0.179321] pci 0000:05:06.0: reg 10 32bit mmio: [0xfa104000-0xfa1047ff]
[ 0.179328] pci 0000:05:06.0: reg 14 32bit mmio: [0xfa100000-0xfa103fff]
[ 0.179367] pci 0000:05:06.0: supports D1 D2
[ 0.179368] pci 0000:05:06.0: PME# supported from D0 D1 D2 D3hot
[ 0.179372] pci 0000:05:06.0: PME# disabled
[ 0.179406] pci 0000:00:1e.0: transparent bridge
[ 0.179411] pci 0000:00:1e.0: bridge 32bit mmio: [0xfa100000-0xfa1fffff]
[ 0.179432] pci_bus 0000:00: on NUMA node 0
[ 0.179435] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.179566] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.179620] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.179676] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 0.179721] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.192372] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.192452] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[ 0.192528] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
[ 0.192604] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.192681] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.192758] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.192834] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.192911] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.193002] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.193006] vgaarb: loaded
[ 0.193099] SCSI subsystem initialized
[ 0.193172] libata version 3.00 loaded.
[ 0.193228] usbcore: registered new interface driver usbfs
[ 0.193237] usbcore: registered new interface driver hub
[ 0.193257] usbcore: registered new device driver usb
[ 0.193354] ACPI: WMI: Mapper loaded
[ 0.193356] PCI: Using ACPI for IRQ routing
[ 0.193494] NetLabel: Initializing
[ 0.193496] NetLabel: domain hash size = 128
[ 0.193497] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.193507] NetLabel: unlabeled traffic allowed by default
[ 0.193531] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.193536] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.196177] Switching to clocksource tsc
[ 0.197601] AppArmor: AppArmor Filesystem Enabled
[ 0.197612] pnp: PnP ACPI init
[ 0.197623] ACPI: bus type pnp registered
[ 0.199889] pnp: PnP ACPI: found 15 devices
[ 0.199891] ACPI: ACPI bus type pnp unregistered
[ 0.199895] PnPBIOS: Disabled by ACPI PNP
[ 0.199903] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.199906] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.199908] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.199910] system 00:01: ioport range 0x290-0x294 has been reserved
[ 0.199913] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.199919] system 00:0b: ioport range 0x400-0x4bf could not be reserved
[ 0.199926] system 00:0c: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.199931] system 00:0d: iomem range 0xd5000-0xd7fff has been reserved
[ 0.199933] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.199935] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.199938] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
[ 0.199940] system 00:0d: iomem range 0x7fee0000-0x7fefffff could not be reserved
[ 0.199942] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.199945] system 00:0d: iomem range 0x100000-0x7fedffff could not be reserved
[ 0.199947] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.199950] system 00:0d: iomem range 0xfed10000-0xfed1dfff has been reserved
[ 0.199952] system 00:0d: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.199954] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.199956] system 00:0d: iomem range 0xffb00000-0xffb7ffff has been reserved
[ 0.199959] system 00:0d: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.199961] system 00:0d: iomem range 0xe0000-0xeffff has been reserved
[ 0.234639] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.234642] pci 0000:00:01.0: IO window: 0xb000-0xbfff
[ 0.234646] pci 0000:00:01.0: MEM window: 0xf4000000-0xf7ffffff
[ 0.234649] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
[ 0.234652] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.234655] pci 0000:00:1c.0: IO window: 0xa000-0xafff
[ 0.234659] pci 0000:00:1c.0: MEM window: 0x80000000-0x801fffff
[ 0.234663] pci 0000:00:1c.0: PREFETCH window: 0x00000080200000-0x000000803fffff
[ 0.234668] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 0.234670] pci 0000:00:1c.4: IO window: 0xc000-0xcfff
[ 0.234674] pci 0000:00:1c.4: MEM window: 0xfa000000-0xfa0fffff
[ 0.234678] pci 0000:00:1c.4: PREFETCH window: 0x00000080400000-0x000000805fffff
[ 0.234683] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
[ 0.234686] pci 0000:00:1c.5: IO window: 0xd000-0xdfff
[ 0.234690] pci 0000:00:1c.5: MEM window: 0xf8000000-0xf9ffffff
[ 0.234693] pci 0000:00:1c.5: PREFETCH window: 0x80600000-0x807fffff
[ 0.234699] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.234700] pci 0000:00:1e.0: IO window: disabled
[ 0.234705] pci 0000:00:1e.0: MEM window: 0xfa100000-0xfa1fffff
[ 0.234708] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.234720] alloc irq_desc for 16 on node -1
[ 0.234722] alloc kstat_irqs on node -1
[ 0.234728] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.234731] pci 0000:00:01.0: setting latency timer to 64
[ 0.234739] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.234743] pci 0000:00:1c.0: setting latency timer to 64
[ 0.234750] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.234753] pci 0000:00:1c.4: setting latency timer to 64
[ 0.234759] alloc irq_desc for 17 on node -1
[ 0.234761] alloc kstat_irqs on node -1
[ 0.234764] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.234767] pci 0000:00:1c.5: setting latency timer to 64
[ 0.234772] pci 0000:00:1e.0: setting latency timer to 64
[ 0.234776] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.234778] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.234780] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.234782] pci_bus 0000:01: resource 1 mem: [0xf4000000-0xf7ffffff]
[ 0.234785] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
[ 0.234787] pci_bus 0000:02: resource 0 io: [0xa000-0xafff]
[ 0.234789] pci_bus 0000:02: resource 1 mem: [0x80000000-0x801fffff]
[ 0.234791] pci_bus 0000:02: resource 2 pref mem [0x80200000-0x803fffff]
[ 0.234793] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff]
[ 0.234795] pci_bus 0000:03: resource 1 mem: [0xfa000000-0xfa0fffff]
[ 0.234796] pci_bus 0000:03: resource 2 pref mem [0x80400000-0x805fffff]
[ 0.234798] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.234800] pci_bus 0000:04: resource 1 mem: [0xf8000000-0xf9ffffff]
[ 0.234802] pci_bus 0000:04: resource 2 pref mem [0x80600000-0x807fffff]
[ 0.234805] pci_bus 0000:05: resource 1 mem: [0xfa100000-0xfa1fffff]
[ 0.234806] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.234808] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
[ 0.234840] NET: Registered protocol family 2
[ 0.234922] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.235170] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.235567] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.235769] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.235771] TCP reno registered
[ 0.235842] NET: Registered protocol family 1
[ 0.235971] pci 0000:01:00.0: Boot video device
[ 0.236122] cpufreq-nforce2: No nForce2 chipset.
[ 0.236143] Scanning for low memory corruption every 60 seconds
[ 0.236234] audit: initializing netlink socket (disabled)
[ 0.236242] type=2000 audit(1283719209.235:1): initialized
[ 0.243788] highmem bounce pool size: 64 pages
[ 0.243792] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.244952] VFS: Disk quotas dquot_6.5.2
[ 0.245000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.245437] fuse init (API version 7.13)
[ 0.245502] msgmni has been set to 1690
[ 0.245663] alg: No test for stdrng (krng)
[ 0.245704] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.245706] io scheduler noop registered
[ 0.245707] io scheduler anticipatory registered
[ 0.245709] io scheduler deadline registered
[ 0.245740] io scheduler cfq registered (default)
[ 0.245853] alloc irq_desc for 24 on node -1
[ 0.245855] alloc kstat_irqs on node -1
[ 0.245862] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.245867] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.245945] alloc irq_desc for 25 on node -1
[ 0.245947] alloc kstat_irqs on node -1
[ 0.245952] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.245959] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.246050] alloc irq_desc for 26 on node -1
[ 0.246052] alloc kstat_irqs on node -1
[ 0.246057] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 0.246063] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.246163] alloc irq_desc for 27 on node -1
[ 0.246165] alloc kstat_irqs on node -1
[ 0.246170] pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
[ 0.246176] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.246243] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.246316] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.246388] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.246391] ACPI: Power Button [PWRB]
[ 0.246438] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.246440] ACPI: Power Button [PWRF]
[ 0.246688] processor LNXCPU:00: registered as cooling_device0
[ 0.246838] ACPI: SSDT 7fee8300 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.247153] processor LNXCPU:01: registered as cooling_device1
[ 0.248807] isapnp: Scanning for PnP cards...
[ 0.249790] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.249878] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.250170] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.251005] brd: module loaded
[ 0.251352] loop: module loaded
[ 0.251408] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.251512] pata_acpi 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.251537] pata_acpi 0000:03:00.1: setting latency timer to 64
[ 0.251549] pata_acpi 0000:03:00.1: PCI INT B disabled
[ 0.251776] Fixed MDIO Bus: probed
[ 0.251801] PPP generic driver version 2.4.2
[ 0.251826] tun: Universal TUN/TAP device driver, 1.6
[ 0.251828] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.251896] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.251909] alloc irq_desc for 18 on node -1
[ 0.251911] alloc kstat_irqs on node -1
[ 0.251915] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.251922] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.251925] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.251947] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.255843] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.263825] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfa205000
[ 0.279863] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.279953] usb usb1: configuration #1 chosen from 1 choice
[ 0.279976] hub 1-0:1.0: USB hub found
[ 0.279982] hub 1-0:1.0: 6 ports detected
[ 0.280036] alloc irq_desc for 23 on node -1
[ 0.280037] alloc kstat_irqs on node -1
[ 0.280042] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.280054] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.280057] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.280088] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.283984] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.283996] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfa204000
[ 0.307843] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.307936] usb usb2: configuration #1 chosen from 1 choice
[ 0.307958] hub 2-0:1.0: USB hub found
[ 0.307964] hub 2-0:1.0: 6 ports detected
[ 0.308016] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.308030] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.308065] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.308072] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.308074] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.308100] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.308130] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100
[ 0.308196] usb usb3: configuration #1 chosen from 1 choice
[ 0.308215] hub 3-0:1.0: USB hub found
[ 0.308220] hub 3-0:1.0: 2 ports detected
[ 0.308255] alloc irq_desc for 21 on node -1
[ 0.308257] alloc kstat_irqs on node -1
[ 0.308261] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.308266] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.308268] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.308294] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.308320] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200
[ 0.308385] usb usb4: configuration #1 chosen from 1 choice
[ 0.308406] hub 4-0:1.0: USB hub found
[ 0.308411] hub 4-0:1.0: 2 ports detected
[ 0.308443] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.308447] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.308450] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.308471] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.308491] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000
[ 0.308552] usb usb5: configuration #1 chosen from 1 choice
[ 0.308573] hub 5-0:1.0: USB hub found
[ 0.308577] hub 5-0:1.0: 2 ports detected
[ 0.308612] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.308616] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.308618] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.308640] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.308659] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[ 0.308722] usb usb6: configuration #1 chosen from 1 choice
[ 0.308740] hub 6-0:1.0: USB hub found
[ 0.308745] hub 6-0:1.0: 2 ports detected
[ 0.308777] alloc irq_desc for 19 on node -1
[ 0.308778] alloc kstat_irqs on node -1
[ 0.308781] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.308786] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.308788] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.308812] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.308837] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[ 0.308901] usb usb7: configuration #1 chosen from 1 choice
[ 0.308919] hub 7-0:1.0: USB hub found
[ 0.308924] hub 7-0:1.0: 2 ports detected
[ 0.308956] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.308961] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.308964] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.308986] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.309005] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
[ 0.309069] usb usb8: configuration #1 chosen from 1 choice
[ 0.309088] hub 8-0:1.0: USB hub found
[ 0.309092] hub 8-0:1.0: 2 ports detected
[ 0.309164] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.309165] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.309316] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.309375] mice: PS/2 mouse device common for all mice
[ 0.309461] rtc_cmos 00:04: RTC can wake from S4
[ 0.309492] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.309513] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.309588] device-mapper: uevent: version 1.0.3
[ 0.333098] Freeing initrd memory: 7768k freed
[ 0.341345] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.343686] device-mapper: multipath: version 1.1.0 loaded
[ 0.343689] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.343783] EISA: Probing bus 0 at eisa.0
[ 0.343807] EISA: Detected 0 cards.
[ 0.343860] cpuidle: using governor ladder
[ 0.343862] cpuidle: using governor menu
[ 0.344216] TCP cubic registered
[ 0.344329] NET: Registered protocol family 10
[ 0.344693] lo: Disabled Privacy Extensions
[ 0.344946] NET: Registered protocol family 17
[ 0.346909] Using IPI No-Shortcut mode
[ 0.346996] PM: Resume from disk failed.
[ 0.347011] registered taskstats version 1
[ 0.347370] Magic number: 10:647:699
[ 0.347432] rtc_cmos 00:04: setting system clock to 2010-09-05 20:40:09 UTC (1283719209)
[ 0.347434] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.347436] EDD information not available.
[ 0.363779] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.603158] isapnp: No Plug & Play device found
[ 0.603169] Freeing unused kernel memory: 656k freed
[ 0.603370] Write protecting the kernel text: 4676k
[ 0.603400] Write protecting the kernel read-only data: 1840k
[ 0.615210] udev: starting version 151
[ 0.653773] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.653804] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 0.669117] scsi0 : pata_jmicron
[ 0.670162] ahci 0000:00:1f.2: version 3.0
[ 0.670178] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.670210] alloc irq_desc for 28 on node -1
[ 0.670212] alloc kstat_irqs on node -1
[ 0.670220] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 0.670262] ahci: SSS flag set, parallel bus scan disabled
[ 0.670293] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.670296] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems
[ 0.670299] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.686088] scsi1 : pata_jmicron
[ 0.686675] ata1: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 17
[ 0.686678] ata2: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 17
[ 0.688909] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.688925] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.688962] r8169 0000:04:00.0: setting latency timer to 64
[ 0.689016] alloc irq_desc for 29 on node -1
[ 0.689018] alloc kstat_irqs on node -1
[ 0.689031] r8169 0000:04:00.0: irq 29 for MSI/MSI-X
[ 0.689520] eth0: RTL8168b/8111b at 0xf80d4000, 00:1a:4d:51:fa:6c, XID 18000000 IRQ 29
[ 0.702059] Floppy drive(s): fd0 is 1.44M
[ 0.710388] scsi2 : ahci
[ 0.710454] scsi3 : ahci
[ 0.710501] scsi4 : ahci
[ 0.710555] scsi5 : ahci
[ 0.710599] scsi6 : ahci
[ 0.710642] scsi7 : ahci
[ 0.710771] ata3: SATA max UDMA/133 abar m2048@0xfa206000 port 0xfa206100 irq 28
[ 0.710774] ata4: SATA max UDMA/133 abar m2048@0xfa206000 port 0xfa206180 irq 28
[ 0.710776] ata5: SATA max UDMA/133 abar m2048@0xfa206000 port 0xfa206200 irq 28
[ 0.710779] ata6: SATA max UDMA/133 abar m2048@0xfa206000 port 0xfa206280 irq 28
[ 0.710781] ata7: SATA max UDMA/133 abar m2048@0xfa206000 port 0xfa206300 irq 28
[ 0.710783] ata8: SATA max UDMA/133 abar m2048@0xfa206000 port 0xfa206380 irq 28
[ 0.710813] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.719259] FDC 0 is a post-1991 82077
[ 0.723759] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.723764] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.723770] ahci 0000:03:00.0: setting latency timer to 64
[ 0.723896] scsi8 : ahci
[ 0.723964] scsi9 : ahci
[ 0.724033] ata9: SATA max UDMA/133 abar m8192@0xfa000000 port 0xfa000100 irq 16
[ 0.724037] ata10: SATA max UDMA/133 abar m8192@0xfa000000 port 0xfa000180 irq 16
[ 0.848585] ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.05, max UDMA/66
[ 0.864681] ata1.00: configured for UDMA/66
[ 0.867266] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55N 1.05 PQ: 0 ANSI: 5
[ 0.871466] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.871470] Uniform CD-ROM driver Revision: 3.20
[ 0.871553] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.871614] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.992476] usb 8-1: new full speed USB device using uhci_hcd and address 2
[ 1.044035] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.044063] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.169195] usb 8-1: configuration #1 chosen from 1 choice
[ 1.196024] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.211733] ata3.00: ATA-8: WDC WD3200AAJS-00VWA0, 12.01B02, max UDMA/133
[ 1.211736] ata3.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.212573] ata3.00: configured for UDMA/133
[ 1.228107] scsi 2:0:0:0: Direct-Access ATA WDC WD3200AAJS-0 12.0 PQ: 0 ANSI: 5
[ 1.228245] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.228267] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.228341] sd 2:0:0:0: [sda] Write Protect is off
[ 1.228343] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.228418] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.228713] sda: sda1 sda2 sda5 sda6 sda7 sda8
[ 1.259610] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.412044] usb 8-2: new full speed USB device using uhci_hcd and address 3
[ 1.548025] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.605263] usb 8-2: configuration #1 chosen from 1 choice
[ 1.884025] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.220023] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.556023] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.892023] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.913260] usbcore: registered new interface driver hiddev
[ 2.913346] ohci1394 0000:05:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.916550] input: Razer DeathAdder as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input4
[ 2.916623] generic-usb 0003:1532:0007.0001: input,hidraw0: USB HID v1.11 Mouse [Razer DeathAdder] on usb-0000:00:1d.2-1/input0
[ 2.916645] usbcore: registered new interface driver usbhid
[ 2.916647] usbhid: v2.6:USB HID core driver
[ 2.929817] REISERFS (device sda8): found reiserfs format "3.6" with standard journal
[ 2.929825] REISERFS (device sda8): using ordered data mode
[ 2.936406] REISERFS (device sda8): journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 2.936588] REISERFS (device sda8): checking transaction log (sda8)
[ 2.958300] REISERFS (device sda8): Using r5 hash to sort names
[ 2.968547] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fa104000-fa1047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 3.898625] Adding 4194296k swap on /dev/sda6. Priority:-1 extents:1 across:4194296k
[ 4.005270] udev: starting version 151
[ 4.244166] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c6fa1d00001a4d]
[ 4.458284] Linux agpgart interface v0.103
[ 4.589166] NET: Registered protocol family 8
[ 4.589168] NET: Registered protocol family 20
[ 4.726974] [drm] Initialized drm 1.1.0 20060810
[ 4.733448] parport_pc 00:09: reported by Plug and Play ACPI
[ 4.733491] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 4.804004] ppdev: user-space parallel port driver
[ 4.841823] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.841828] nouveau 0000:01:00.0: setting latency timer to 64
[ 5.255447] type=1505 audit(1283712014.405:2): operation="profile_load" pid=682 name="/sbin/dhclient3"
[ 5.255555] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x40250000, bo e64bfa00
[ 5.255678] fb0: nouveaufb frame buffer device
[ 5.255680] registered panic notifier
[ 5.255684] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[ 5.255967] type=1505 audit(1283712014.405:3): operation="profile_load" pid=682 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 5.256250] type=1505 audit(1283712014.405:4): operation="profile_load" pid=682 name="/usr/lib/connman/scripts/dhclient-script"
[ 5.288573] alloc irq_desc for 22 on node -1
[ 5.288576] alloc kstat_irqs on node -1
[ 5.288582] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.288622] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.300026] usb 8-2: reset full speed USB device using uhci_hcd and address 3
[ 5.369228] vga16fb: initializing
[ 5.369231] vga16fb: mapped to 0xc00a0000
[ 5.369234] vga16fb: not registering due to another framebuffer present
[ 5.462972] [drm] nouveau 0000:01:00.0: 0x1203: parsing clock script 0
[ 5.463023] Console: switching to colour frame buffer device 160x64
[ 5.472719] usbcore: registered new interface driver speedtch
[ 5.473147] speedtch 8-2:1.0: firmware: requesting speedtch-1.bin.2.00
[ 5.555906] speedtch 8-2:1.0: firmware: requesting speedtch-1.bin.2
[ 5.557653] speedtch 8-2:1.0: firmware: requesting speedtch-1.bin
[ 5.558985] speedtch 8-2:1.0: speedtch_find_firmware: no stage 1 firmware found!
[ 5.593081] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 10.470784] type=1505 audit(1283712019.620:5): operation="profile_load" pid=1014 name="/usr/share/gdm/guest-session/Xsession"
[ 10.472271] type=1505 audit(1283712019.624:6): operation="profile_replace" pid=1016 name="/sbin/dhclient3"
[ 10.923943] type=1505 audit(1283712020.072:14): operation="profile_load" pid=1026 name="/usr/sbin/tcpdump"
[ 11.896483] r8169: eth0: link down
[ 11.896630] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.610388] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2
[ 13.613771] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2
[ 14.370060] CPU0 attaching NULL sched-domain.
[ 14.370064] CPU1 attaching NULL sched-domain.
[ 14.392070] CPU0 attaching sched-domain:
[ 14.392074] domain 0: span 0-1 level MC
[ 14.392077] groups: 0 1
[ 14.392083] CPU1 attaching sched-domain:
[ 14.392085] domain 0: span 0-1 level MC
[ 14.392088] groups: 1 0
[ 19.174198] CPU0 attaching NULL sched-domain.
[ 19.174202] CPU1 attaching NULL sched-domain.
[ 19.196573] CPU0 attaching sched-domain:
[ 19.196576] domain 0: span 0-1 level MC
[ 19.196579] groups: 0 1
[ 19.196585] CPU1 attaching sched-domain:
[ 19.196587] domain 0: span 0-1 level MC
[ 19.196590] groups: 1 0