[ 23.178] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 23.178] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 23.178] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 23.179] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 23.179] (II) No input driver specified, ignoring this device.
[ 23.179] (II) This device may have been added with another device file.
[ 23.180] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 23.180] (II) No input driver specified, ignoring this device.
[ 23.180] (II) This device may have been added with another device file.
[ 26.917] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 57.191] (II) Open ACPI successful (/var/run/acpid.socket)
[ 57.192] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 57.192] (II) intel(0): switch to mode 1024x600 on crtc 4 (pipe 1)
[ 57.210] (II) intel(0): EDID vendor "HSD", prod id 1001
[ 57.210] (II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
[ 57.210] (II) intel(0): Printing DDC gathered Modelines:
[ 57.211] (II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz eP)
[ 57.211] (II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz e)
[ 57.238] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 60.709] (II) evdev: Power Button: Close
[ 60.710] (II) UnloadModule: "evdev"
[ 60.720] (II) evdev: Video Bus: Close
[ 60.720] (II) UnloadModule: "evdev"
[ 60.726] (II) evdev: Power Button: Close
[ 60.727] (II) UnloadModule: "evdev"
[ 60.733] (II) evdev: Sleep Button: Close
[ 60.733] (II) UnloadModule: "evdev"
[ 60.746] (II) evdev: USB 2.0 Camera: Close
[ 60.747] (II) UnloadModule: "evdev"
[ 60.747] (II) evdev: Eee PC WMI hotkeys: Close
[ 60.747] (II) UnloadModule: "evdev"
[ 60.750] (II) evdev: AT Translated Set 2 keyboard: Close
[ 60.750] (II) UnloadModule: "evdev"
[ 60.751] (II) UnloadModule: "synaptics"
[ 60.761] 8 XSELINUXs still allocated at reset
[ 60.761] SCREEN: 0 objects of 140 bytes = 0 total bytes 0 private allocs
[ 60.761] DEVICE: 0 objects of 64 bytes = 0 total bytes 0 private allocs
[ 60.761] CLIENT: 0 objects of 152 bytes = 0 total bytes 0 private allocs
[ 60.761] WINDOW: 0 objects of 36 bytes = 0 total bytes 0 private allocs
[ 60.761] PIXMAP: 4 objects of 24 bytes = 96 total bytes 0 private allocs
[ 60.762] GC: 0 objects of 56 bytes = 0 total bytes 0 private allocs
[ 60.762] CURSOR: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 60.762] CURSOR_BITS: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 60.762] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs
[ 60.762] GLYPH: 0 objects of 16 bytes = 0 total bytes 0 private allocs
[ 60.762] TOTAL: 4 objects, 96 bytes, 0 allocs
[ 60.762] 4 PIXMAPs still allocated at reset
[ 60.762] PIXMAP: 4 objects of 24 bytes = 96 total bytes 0 private allocs
[ 60.762] GC: 0 objects of 56 bytes = 0 total bytes 0 private allocs
[ 60.762] CURSOR: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 60.762] CURSOR_BITS: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 60.762] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs
[ 60.762] GLYPH: 0 objects of 16 bytes = 0 total bytes 0 private allocs
[ 60.762] TOTAL: 4 objects, 96 bytes, 0 allocs
[ 60.762] 1 DAMAGEs still allocated at reset
[ 60.762] GLYPH: 0 objects of 16 bytes = 0 total bytes 0 private allocs
[ 60.762] TOTAL: 0 objects, 0 bytes, 0 allocs
[ 60.762] 4 PICTUREs still allocated at reset
[ 60.762] TOTAL: 0 objects, 0 bytes, 0 allocs
[ 60.764] (II) Open ACPI successful (/var/run/acpid.socket)
[ 60.765] (II) APM registered successfully
[ 60.765] (II) intel(0): SNA initialized with gen3 backend
[ 60.765] (II) intel(0): HW Cursor enabled
[ 60.765] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 60.770] (==) intel(0): DPMS enabled
[ 60.771] (II) intel(0): [XvMC] i915_xvmc driver initialized.
[ 60.771] (II) intel(0): [DRI2] Setup complete
[ 60.771] (II) intel(0): [DRI2] DRI driver: i915
[ 60.771] (II) intel(0): direct rendering: DRI2 Enabled
[ 60.771] (==) intel(0): hotplug detection: "enabled"
[ 60.771] (--) RandR disabled
[ 60.798] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 60.798] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 60.798] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 60.798] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 60.798] (II) AIGLX: Loaded and initialized i915
[ 60.798] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 60.799]
[ 60.799] Backtrace:
[ 60.816] 0: /usr/bin/X (xorg_backtrace+0x49) [0x81b75d9]
[ 60.816] 1: /usr/bin/X (0x8048000+0x173366) [0x81bb366]
[ 60.816] 2: linux-gate.so.1 (__kernel_rt_sigreturn+0x0) [0xb77ba40c]
[ 60.817] 3: /usr/bin/X (CreatePicture+0x113) [0x8133fe3]
[ 60.817] 4: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb7113000+0x6bf4b) [0xb717ef4b]
[ 60.817] 5: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb7113000+0x46ee2) [0xb7159ee2]
[ 60.817] 6: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb7113000+0x69b1f) [0xb717cb1f]
[ 60.817] 7: /usr/bin/X (0x8048000+0xa0f90) [0x80e8f90]
[ 60.817] 8: /usr/bin/X (0x8048000+0x1cc11) [0x8064c11]
[ 60.818] 9: /lib/libc.so.6 (__libc_start_main+0xf5) [0xb7431605]
[ 60.818] 10: /usr/bin/X (0x8048000+0x1d0c9) [0x80650c9]
[ 60.818]
[ 60.818] Segmentation fault at address 0xc
[ 60.818]
Fatal server error:
[ 60.818] Caught signal 11 (Segmentation fault). Server aborting
[ 60.818]
[ 60.819]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 60.819] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 60.819]
[ 60.819] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 60.819] (WW) intel(0): drmDropMaster failed: Invalid argument
[ 60.855] Server terminated with error (1). Closing log file.