[ 108.092507] systemd[1]: Got D-Bus request: org.freedesktop.DBus.NameOwnerChanged() on /org/freedesktop/DBus [ 113.132153] apr_tal: SMD_EVENT_OPEN [ 113.185167] amp_enable: AMP_EN is set to 1 [ 116.732977] SLIM_CL: skip reconfig sequence [ 116.745612] amp_enable: amp enable bypass(2) [ 116.746070] amp_enable: AMP_EN is set to 0 [ 117.125164] amp_enable: AMP_EN is set to 1 [ 122.693758] SLIM_CL: skip reconfig sequence [ 122.707553] amp_enable: amp enable bypass(2) [ 122.708072] amp_enable: AMP_EN is set to 0 [ 123.135357] adjust_soc: ibat_ua = 850500, vbat_uv = 4104198, soc = 98, batt_temp=301 [ 123.222218] ------------[ cut here ]------------ [ 123.222432] WARNING: at /home/micha/mer/android/droid/kernel/lge/mako/net/wireless/scan.c:590 cfg80211_bss_update+0x3c4/0x510() [ 123.222798] [] (unwind_backtrace+0x0/0xe0) from [] (warn_slowpath_common+0x48/0x60) [ 123.223134] [] (warn_slowpath_common+0x48/0x60) from [] (warn_slowpath_null+0x18/0x1c) [ 123.223500] [] (warn_slowpath_null+0x18/0x1c) from [] (cfg80211_bss_update+0x3c4/0x510) [ 123.223836] [] (cfg80211_bss_update+0x3c4/0x510) from [] (cfg80211_inform_bss_frame+0x190/0x1c4) [ 123.224172] [] (cfg80211_inform_bss_frame+0x190/0x1c4) from [] (wlan_hdd_cfg80211_inform_bss_frame+0x200/0x224) [ 123.224507] [] (wlan_hdd_cfg80211_inform_bss_frame+0x200/0x224) from [] (hdd_cfg80211_scan_done_callback+0x19c/0x344) [ 123.224904] [] (hdd_cfg80211_scan_done_callback+0x19c/0x344) from [] (csrScanCallCallback+0x24/0x4c) [ 123.225270] [] (csrScanCallCallback+0x24/0x4c) from [] (csrReleaseScanCommand+0x4c/0xa8) [ 123.225606] [] (csrReleaseScanCommand+0x4c/0xa8) from [] (csrScanSmeScanResponse+0x164/0x1a8) [ 123.225972] [] (csrScanSmeScanResponse+0x164/0x1a8) from [] (sme_ProcessMsg+0x49c/0x55c) [ 123.226308] [] (sme_ProcessMsg+0x49c/0x55c) from [] (VosMCThread+0x4e4/0x678) [ 123.226522] [] (VosMCThread+0x4e4/0x678) from [] (kthread+0x84/0x90) [ 123.226857] [] (kthread+0x84/0x90) from [] (kernel_thread_exit+0x0/0x8) [ 123.227163] ---[ end trace 4ffc40c3fb4114bc ]--- [ 123.272699] [WLAN][915:E :HDD] wlan_hdd_cfg80211_set_cipher: received cipher 0 - considering none [ 123.272821] [WLAN][915:E :HDD] wlan_hdd_cfg80211_set_cipher: received cipher 0 - considering none [ 123.312894] [WLAN][1498:E :PE ] limProcessAssocRspFrame: 705: Successfully Associated with BSS 10:6f:3f:e7:72:b8 [ 123.327910] wlan: connected to 10:6f:3f:e7:72:b8 [ 123.330932] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 123.332641] [WLAN][1524:E :SME] csrRoamIssueDisassociateCmd: 6050: reason = 0 [ 123.339447] [WLAN][1498:E :SME] csrRoamProcessDisassocDeauth: 5970: restore AC weights (1-3-5-7) [ 123.339661] [WLAN][1498:E :SME] csrRoamIssueDisassociate: 1946: restore AC weights (1-3-5-7) [ 123.339844] [WLAN][1498:E :SME] csrNeighborRoamIndicateDisconnect: 2798: Disconnect indication on session 0 in state 2 (sub-state 12) [ 123.339966] [WLAN][1498:E :SME] csrNeighborRoamIndicateDisconnect: 2865: Received disconnect event in state 2 [ 123.340088] [WLAN][1498:E :SME] csrNeighborRoamIndicateDisconnect: 2866: Transitioning to INIT state [ 123.340210] [WLAN][1498:E :SME] sme_QosDeleteBufferedRequests: 6306: Buffered List empty, nothing to delete on session 0 [ 123.340332] [WLAN][1498:E :SME] sme_QosDeleteExistingFlows: 6086: Flow List empty, nothing to delete [ 123.340454] [WLAN][1498:E :PE ] __limProcessSmeDisassocReq: 2176: received DISASSOC_REQ message. Reason: 1 global SmeState: 1 [ 123.341217] [WLAN][1498:E :PE ] limProcessMlmDisassocReqPostSuspend: 2792: FT Preauth Session (ea988000,0) Cleanup [ 123.374484] [WLAN][1498:E :SME] csrRoamingStateMsgProcessor: 7249: eWNI_SME_DISASSOC_RSP subState = 12 [ 123.374698] wlan: disconnected [ 123.377781] cfg80211: Calling CRDA for country: US [ 123.384526] [WLAN][1498:E :SME] sme_QosDeleteBufferedRequests: 6306: Buffered List empty, nothing to delete on session 0 [ 123.384648] [WLAN][1498:E :SME] sme_QosDeleteExistingFlows: 6086: Flow List empty, nothing to delete [ 123.384709] [WLAN][1498:E :SME] csrNeighborRoamIndicateDisconnect: 2798: Disconnect indication on session 0 in state 1 (sub-state 0) [ 123.384831] [WLAN][1498:E :TL ] Could not find entry, maybe invalid arg [ 123.390843] [WLAN][1498:E :TL ] Could not find entry, maybe invalid arg [ 123.404181] cfg80211: Regulatory domain changed to country: US [ 123.404272] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 123.404394] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 123.404517] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm) [ 123.404608] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm) [ 123.404730] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm) [ 123.404791] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 123.405249] cfg80211: Calling CRDA to update world regulatory domain [ 123.416542] cfg80211: World regulatory domain updated: [ 123.416603] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 123.416725] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 123.416847] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 123.416908] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) [ 123.417030] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 123.417152] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 123.417213] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 131.908133] msm_otg msm_otg: USB exited from low power mode [ 132.585289] msm_otg msm_otg: Avail curr from USB = 500 [ 132.585441] msm_otg msm_otg: current: 0 -> 500 (mA) [ 132.585502] pm_power_set_property_usb: usb_target_ma 0 [ 132.592278] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received [ 132.593224] chg_gone_irq_handler: chg_gone=0, usb_valid = 1 [ 132.593346] chg_gone_irq_handler: Chg gone fsm_state=3 [ 132.621699] pm8xxx-led pm8xxx-led: resume red set 0 [ 132.621852] pm8xxx-led pm8xxx-led: resume green set 255 [ 132.622157] pm8xxx-led pm8xxx-led: resume blue set 0 [ 133.057714] unplug_check_worker: Stopping Unplug Check Worker USB == 500mA [ 133.115153] amp_enable: AMP_EN is set to 1 [ 133.995177] wlan0: no IPv6 routers present