smartctl 6.3 2014-07-26 r3976 [x86_64-linux-4.0.5-gentoo] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Samsung SSD 850 EVO 250GB
Serial Number: S21PNSAG271572V
LU WWN Device Id: 5 002538 da01bef3d
Firmware Version: EMT01B6Q
User Capacity: 250,059,350,016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Aug 12 20:46:29 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 133) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
9 Power_On_Hours -O--CK 099 099 000 - 2257
12 Power_Cycle_Count -O--CK 099 099 000 - 22
177 Wear_Leveling_Count PO--C- 099 099 000 - 10
179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0
181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0
182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0
183 Runtime_Bad_Block PO--C- 100 100 010 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O--CK 061 057 000 - 39
195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0
235 Unknown_Attribute -O--C- 099 099 000 - 9
241 Total_LBAs_Written -O--CK 099 099 000 - 3015412097
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 SL VS 16 Device vendor specific log
0xa5 SL VS 16 Device vendor specific log
0xce SL VS 16 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
255 0 65535 Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: SCT command executing in background (5)
Current Temperature: 38 Celsius
Power Cycle Min/Max Temperature: 27/42 Celsius
Lifetime Min/Max Temperature: 0/70 Celsius
Under/Over Temperature Limit Count: 4294967295/4294901760
SCT Temperature History Version: 3 (Unknown, should be 2)
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: 0/70 Celsius
Min/Max Temperature Limit: 0/70 Celsius
Temperature History Size (Index): 128 (76)
Index Estimated Time Temperature Celsius
77 2015-08-11 23:30 36 *****************
78 2015-08-11 23:40 35 ****************
79 2015-08-11 23:50 35 ****************
80 2015-08-12 00:00 38 *******************
... ..( 3 skipped). .. *******************
84 2015-08-12 00:40 38 *******************
85 2015-08-12 00:50 35 ****************
86 2015-08-12 01:00 34 ***************
87 2015-08-12 01:10 33 **************
88 2015-08-12 01:20 34 ***************
89 2015-08-12 01:30 33 **************
90 2015-08-12 01:40 33 **************
91 2015-08-12 01:50 32 *************
92 2015-08-12 02:00 33 **************
93 2015-08-12 02:10 36 *****************
94 2015-08-12 02:20 34 ***************
95 2015-08-12 02:30 33 **************
96 2015-08-12 02:40 33 **************
97 2015-08-12 02:50 33 **************
98 2015-08-12 03:00 32 *************
... ..( 28 skipped). .. *************
127 2015-08-12 07:50 32 *************
0 2015-08-12 08:00 35 ****************
1 2015-08-12 08:10 34 ***************
2 2015-08-12 08:20 34 ***************
3 2015-08-12 08:30 38 *******************
4 2015-08-12 08:40 39 ********************
5 2015-08-12 08:50 39 ********************
6 2015-08-12 09:00 36 *****************
7 2015-08-12 09:10 33 **************
8 2015-08-12 09:20 33 **************
9 2015-08-12 09:30 33 **************
10 2015-08-12 09:40 32 *************
... ..( 28 skipped). .. *************
39 2015-08-12 14:30 32 *************
40 2015-08-12 14:40 39 ********************
41 2015-08-12 14:50 40 *********************
42 2015-08-12 15:00 41 **********************
43 2015-08-12 15:10 35 ****************
44 2015-08-12 15:20 34 ***************
45 2015-08-12 15:30 33 **************
46 2015-08-12 15:40 33 **************
47 2015-08-12 15:50 32 *************
48 2015-08-12 16:00 32 *************
49 2015-08-12 16:10 32 *************
50 2015-08-12 16:20 33 **************
51 2015-08-12 16:30 32 *************
52 2015-08-12 16:40 32 *************
53 2015-08-12 16:50 33 **************
54 2015-08-12 17:00 36 *****************
55 2015-08-12 17:10 34 ***************
56 2015-08-12 17:20 33 **************
57 2015-08-12 17:30 33 **************
58 2015-08-12 17:40 41 **********************
59 2015-08-12 17:50 37 ******************
60 2015-08-12 18:00 38 *******************
61 2015-08-12 18:10 34 ***************
62 2015-08-12 18:20 34 ***************
63 2015-08-12 18:30 33 **************
64 2015-08-12 18:40 34 ***************
65 2015-08-12 18:50 33 **************
66 2015-08-12 19:00 33 **************
67 2015-08-12 19:10 33 **************
68 2015-08-12 19:20 34 ***************
69 2015-08-12 19:30 34 ***************
70 2015-08-12 19:40 39 ********************
71 2015-08-12 19:50 38 *******************
72 2015-08-12 20:00 37 ******************
73 2015-08-12 20:10 35 ****************
74 2015-08-12 20:20 39 ********************
75 2015-08-12 20:30 39 ********************
76 2015-08-12 20:40 38 *******************
SCT Error Recovery Control:
Read: 50 (5.0 seconds)
Write: 50 (5.0 seconds)
Device Statistics (GP Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 217 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 217 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC