[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.4 (root@main) (gcc version 4.5.3 (CRUX) ) #12 SMP Sat Sep 24 21:54:23 EDT 2011 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000098c00 (usable) [ 0.000000] BIOS-e820: 0000000000098c00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fef0000 (usable) [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.2 present. [ 0.000000] DMI: /MS-7101, BIOS 6.00 PG 02/16/2005 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x7fef0 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00f5190] f5190 [ 0.000000] initial memory mapped : 0 - 01e00000 [ 0.000000] Base memory trampoline at [c0094000] 94000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037800000 page 2M [ 0.000000] 0037800000 - 00379fe000 page 4k [ 0.000000] kernel direct mapping tables up to 379fe000 @ 1dfa000-1e00000 [ 0.000000] ACPI: RSDP 000f8ce0 00014 (v00 IntelR) [ 0.000000] ACPI: RSDT 7fef3040 0002C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 7fef30c0 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 7fef3180 03BE8 (v01 INTELR AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 7fef0000 00040 [ 0.000000] ACPI: APIC 7fef6dc0 00068 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1156MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x0007fef0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x00000098 [ 0.000000] 0: 0x00000100 -> 0x0007fef0 [ 0.000000] On node 0 totalpages: 523896 [ 0.000000] free_area_init_node: node 0, pgdat c171b940, node_mem_map f69fd200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3944 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2314 pages used for memmap [ 0.000000] HighMem zone: 293864 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 0000000000098000 - 0000000000099000 [ 0.000000] PM: Registered nosave memory: 0000000000099000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:7ed00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6600000 s29376 r0 d23872 u1048576 [ 0.000000] pcpu-alloc: s29376 r0 d23872 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519802 [ 0.000000] Kernel command line: auto BOOT_IMAGE=CRUX ro root=900 rootfstype=ext4 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 8384000 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000379fe:0007fef0) [ 0.000000] Memory: 2061588k/2096064k available (4972k kernel code, 33996k reserved, 2337k data, 444k init, 1184712k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB) [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000000] .init : 0xc1724000 - 0xc1793000 ( 444 kB) [ 0.000000] .data : 0xc14db30c - 0xc17238c0 (2337 kB) [ 0.000000] .text : 0xc1000000 - 0xc14db30c (4972 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:1280 [ 0.000000] CPU 0 irqstacks, hard=f580c000 soft=f580e000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3058.235 MHz processor. [ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 6116.47 BogoMIPS (lpj=12232940) [ 0.008786] pid_max: default: 32768 minimum: 301 [ 0.009251] Security Framework initialized [ 0.009645] SELinux: Disabled at boot. [ 0.010061] Mount-cache hash table entries: 512 [ 0.012315] Initializing cgroup subsys cpuacct [ 0.012739] Initializing cgroup subsys memory [ 0.013152] Initializing cgroup subsys devices [ 0.013548] Initializing cgroup subsys freezer [ 0.013944] Initializing cgroup subsys net_cls [ 0.014343] Initializing cgroup subsys blkio [ 0.014796] CPU0: Hyper-Threading is disabled [ 0.015194] mce: CPU supports 4 MCE banks [ 0.015599] CPU0: Thermal monitoring enabled (TM1) [ 0.016012] using mwait in idle threads. [ 0.016569] SMP alternatives: switching to UP code [ 0.023457] ACPI: Core revision 20110413 [ 0.028096] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.028786] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.068951] CPU0: Intel(R) Celeron(R) CPU 3.06GHz stepping 09 [ 0.072003] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.072003] ... version: 0 [ 0.072003] ... bit width: 40 [ 0.072003] ... generic registers: 18 [ 0.072003] ... value mask: 000000ffffffffff [ 0.072003] ... max period: 0000007fffffffff [ 0.072003] ... fixed-purpose events: 0 [ 0.072003] ... event mask: 000000000003ffff [ 0.072003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.072003] Brought up 1 CPUs [ 0.072016] Total of 1 processors activated (6116.47 BogoMIPS). [ 0.072981] devtmpfs: initialized [ 0.073686] PM: Registering ACPI NVS region at 7fef0000 (12288 bytes) [ 0.074247] xor: automatically using best checksumming function: pIII_sse [ 0.092012] pIII_sse : 4626.000 MB/sec [ 0.092407] xor: using function: pIII_sse (4626.000 MB/sec) [ 0.092928] print_constraints: dummy: [ 0.093418] NET: Registered protocol family 16 [ 0.093999] ACPI: bus type pci registered [ 0.094521] dca service started, version 1.12.1 [ 0.096384] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX. [ 0.097111] PCI: PCI BIOS revision 2.10 entry at 0xfacd0, last bus=1 [ 0.097506] PCI: Using configuration type 1 for base access [ 0.100334] bio: create slab at 0 [ 0.168060] raid6: int32x1 730 MB/s [ 0.236059] raid6: int32x2 848 MB/s [ 0.304084] raid6: int32x4 914 MB/s [ 0.372089] raid6: int32x8 453 MB/s [ 0.440046] raid6: mmxx1 1877 MB/s [ 0.508039] raid6: mmxx2 2181 MB/s [ 0.576055] raid6: sse1x1 1082 MB/s [ 0.644079] raid6: sse1x2 1219 MB/s [ 0.712064] raid6: sse2x1 2198 MB/s [ 0.780074] raid6: sse2x2 2102 MB/s [ 0.780467] raid6: using algorithm sse2x1 (2198 MB/s) [ 0.781764] ACPI: EC: Look up EC in DSDT [ 0.785523] ACPI: Interpreter enabled [ 0.785919] ACPI: (supports S0 S1 S4 S5) [ 0.786546] ACPI: Using IOAPIC for interrupt routing [ 0.792415] ACPI: No dock devices found. [ 0.792814] HEST: Table not found. [ 0.793211] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.794051] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.794650] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.794654] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.794658] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.794662] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) [ 0.794666] pci_root PNP0A03:00: host bridge window [mem 0x7ff00000-0xfebfffff] (ignored) [ 0.794687] pci 0000:00:00.0: [8086:2570] type 0 class 0x000600 [ 0.794692] pci 0000:00:00.0: Enabling MCH 'Overflow' Device [ 0.795098] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref] [ 0.795163] pci 0000:00:02.0: [8086:2572] type 0 class 0x000380 [ 0.795179] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] [ 0.795189] pci 0000:00:02.0: reg 14: [mem 0xfb000000-0xfb07ffff] [ 0.795199] pci 0000:00:02.0: reg 18: [io 0xe400-0xe407] [ 0.795260] pci 0000:00:06.0: [8086:2576] type 0 class 0x000880 [ 0.795273] pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff] [ 0.795358] pci 0000:00:1d.0: [8086:24d2] type 0 class 0x000c03 [ 0.795405] pci 0000:00:1d.0: reg 20: [io 0xe000-0xe01f] [ 0.795442] pci 0000:00:1d.1: [8086:24d4] type 0 class 0x000c03 [ 0.795489] pci 0000:00:1d.1: reg 20: [io 0xe100-0xe11f] [ 0.795525] pci 0000:00:1d.2: [8086:24d7] type 0 class 0x000c03 [ 0.795572] pci 0000:00:1d.2: reg 20: [io 0xe200-0xe21f] [ 0.795608] pci 0000:00:1d.3: [8086:24de] type 0 class 0x000c03 [ 0.795655] pci 0000:00:1d.3: reg 20: [io 0xe300-0xe31f] [ 0.795699] pci 0000:00:1d.7: [8086:24dd] type 0 class 0x000c03 [ 0.795720] pci 0000:00:1d.7: reg 10: [mem 0xfb080000-0xfb0803ff] [ 0.795798] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.795804] pci 0000:00:1d.7: PME# disabled [ 0.795821] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.795867] pci 0000:00:1f.0: [8086:24d0] type 0 class 0x000601 [ 0.795935] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.795959] pci 0000:00:1f.1: [8086:24db] type 0 class 0x000101 [ 0.795975] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.795986] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.795996] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.796007] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.796018] pci 0000:00:1f.1: reg 20: [io 0xf000-0xf00f] [ 0.796062] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff] [ 0.796094] pci 0000:00:1f.2: [8086:24d1] type 0 class 0x000101 [ 0.796108] pci 0000:00:1f.2: reg 10: [io 0xe500-0xe507] [ 0.796118] pci 0000:00:1f.2: reg 14: [io 0xe600-0xe603] [ 0.796128] pci 0000:00:1f.2: reg 18: [io 0xe700-0xe707] [ 0.796137] pci 0000:00:1f.2: reg 1c: [io 0xe800-0xe803] [ 0.796147] pci 0000:00:1f.2: reg 20: [io 0xe900-0xe90f] [ 0.796182] pci 0000:00:1f.3: [8086:24d3] type 0 class 0x000c05 [ 0.796229] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f] [ 0.796268] pci 0000:00:1f.5: [8086:24d5] type 0 class 0x000401 [ 0.796285] pci 0000:00:1f.5: reg 10: [io 0xeb00-0xebff] [ 0.796295] pci 0000:00:1f.5: reg 14: [io 0xec00-0xec3f] [ 0.796305] pci 0000:00:1f.5: reg 18: [mem 0xfb081000-0xfb0811ff] [ 0.796316] pci 0000:00:1f.5: reg 1c: [mem 0xfb082000-0xfb0820ff] [ 0.796356] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.796361] pci 0000:00:1f.5: PME# disabled [ 0.796398] pci 0000:01:00.0: [10de:0221] type 0 class 0x000300 [ 0.796417] pci 0000:01:00.0: reg 10: [mem 0xf8000000-0xf8ffffff] [ 0.796428] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff pref] [ 0.796437] pci 0000:01:00.0: reg 18: [mem 0xf9000000-0xf9ffffff] [ 0.796469] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.796508] pci 0000:01:02.0: [9710:9805] type 0 class 0x000780 [ 0.796523] pci 0000:01:02.0: reg 10: [io 0xd000-0xd007] [ 0.796533] pci 0000:01:02.0: reg 14: [io 0xd100-0xd107] [ 0.796543] pci 0000:01:02.0: reg 18: [io 0xd200-0xd207] [ 0.796553] pci 0000:01:02.0: reg 1c: [io 0xd300-0xd307] [ 0.796564] pci 0000:01:02.0: reg 20: [io 0xd400-0xd407] [ 0.796574] pci 0000:01:02.0: reg 24: [io 0xd500-0xd50f] [ 0.796614] pci 0000:01:0b.0: [10ec:8139] type 0 class 0x000200 [ 0.796632] pci 0000:01:0b.0: reg 10: [io 0xd600-0xd6ff] [ 0.796643] pci 0000:01:0b.0: reg 14: [mem 0xfa020000-0xfa0200ff] [ 0.796683] pci 0000:01:0b.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.796703] pci 0000:01:0b.0: supports D1 D2 [ 0.796705] pci 0000:01:0b.0: PME# supported from D1 D2 D3hot D3cold [ 0.796710] pci 0000:01:0b.0: PME# disabled [ 0.796741] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode) [ 0.797142] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 0.797147] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfaffffff] [ 0.797152] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xefffffff pref] [ 0.797156] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.797159] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) [ 0.797170] pci_bus 0000:00: on NUMA node 0 [ 0.797176] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.797301] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.797517] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) [ 0.806146] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11 12 14 15) [ 0.807234] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 0.808133] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.809225] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.810313] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.812079] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.813602] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.815115] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.816227] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.816955] vgaarb: loaded [ 0.817345] vgaarb: bridge control possible 0000:01:00.0 [ 0.817896] SCSI subsystem initialized [ 0.818391] libata version 3.00 loaded. [ 0.818452] usbcore: registered new interface driver usbfs [ 0.818879] usbcore: registered new interface driver hub [ 0.819331] usbcore: registered new device driver usb [ 0.819908] wmi: Mapper loaded [ 0.820062] PCI: Using ACPI for IRQ routing [ 0.820462] PCI: pci_cache_line_size set to 64 bytes [ 0.820541] reserve RAM buffer: 0000000000098c00 - 000000000009ffff [ 0.820546] reserve RAM buffer: 000000007fef0000 - 000000007fffffff [ 0.820871] hpet clockevent registered [ 0.820878] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.821284] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.821883] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.828126] Switching to clocksource hpet [ 0.831500] pnp: PnP ACPI init [ 0.831914] ACPI: bus type pnp registered [ 0.831914] Switched to NOHz mode on CPU #0 [ 0.832425] pnp 00:00: [bus 00-ff] [ 0.832429] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.832433] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.832436] pnp 00:00: [io 0x0d00-0xffff window] [ 0.832439] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.832442] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.832445] pnp 00:00: [mem 0x7ff00000-0xfebfffff window] [ 0.832522] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.832566] pnp 00:01: [io 0x0010-0x001f] [ 0.832569] pnp 00:01: [io 0x0022-0x003f] [ 0.832572] pnp 00:01: [io 0x0044-0x005f] [ 0.832574] pnp 00:01: [io 0x0062-0x0063] [ 0.832577] pnp 00:01: [io 0x0065-0x006f] [ 0.832579] pnp 00:01: [io 0x0074-0x007f] [ 0.832582] pnp 00:01: [io 0x0091-0x0093] [ 0.832584] pnp 00:01: [io 0x00a2-0x00bf] [ 0.832587] pnp 00:01: [io 0x00e0-0x00ef] [ 0.832589] pnp 00:01: [io 0x0b78-0x0b7b] [ 0.832592] pnp 00:01: [io 0x0f78-0x0f7b] [ 0.832594] pnp 00:01: [io 0x0a78-0x0a7b] [ 0.832597] pnp 00:01: [io 0x0e78-0x0e7b] [ 0.832599] pnp 00:01: [io 0x0bbc-0x0bbf] [ 0.832602] pnp 00:01: [io 0x0fbc-0x0fbf] [ 0.832604] pnp 00:01: [io 0x04d0-0x04d1] [ 0.832607] pnp 00:01: [io 0x0294-0x0297] [ 0.832695] system 00:01: [io 0x0b78-0x0b7b] has been reserved [ 0.833093] system 00:01: [io 0x0f78-0x0f7b] has been reserved [ 0.833488] system 00:01: [io 0x0a78-0x0a7b] has been reserved [ 0.833881] system 00:01: [io 0x0e78-0x0e7b] has been reserved [ 0.834275] system 00:01: [io 0x0bbc-0x0bbf] has been reserved [ 0.843309] system 00:01: [io 0x0fbc-0x0fbf] has been reserved [ 0.843703] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.844111] system 00:01: [io 0x0294-0x0297] has been reserved [ 0.844510] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.844535] pnp 00:02: [dma 4] [ 0.844540] pnp 00:02: [io 0x0000-0x000f] [ 0.844543] pnp 00:02: [io 0x0080-0x0090] [ 0.844545] pnp 00:02: [io 0x0094-0x009f] [ 0.844548] pnp 00:02: [io 0x00c0-0x00df] [ 0.844588] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.844607] pnp 00:03: [io 0x0070-0x0073] [ 0.844622] pnp 00:03: [irq 8] [ 0.844660] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.844676] pnp 00:04: [io 0x0061] [ 0.844714] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.844730] pnp 00:05: [io 0x00f0-0x00ff] [ 0.844739] pnp 00:05: [irq 13] [ 0.844776] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.844957] pnp 00:06: [io 0x03f0-0x03f5] [ 0.844961] pnp 00:06: [io 0x03f7] [ 0.844970] pnp 00:06: [irq 6] [ 0.844973] pnp 00:06: [dma 2] [ 0.845040] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.845269] pnp 00:07: [io 0x03f8-0x03ff] [ 0.845278] pnp 00:07: [irq 4] [ 0.845374] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.845620] pnp 00:08: [io 0x02f8-0x02ff] [ 0.845630] pnp 00:08: [irq 3] [ 0.845719] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.846133] pnp 00:09: [io 0x0278-0x027f] [ 0.846137] pnp 00:09: [io 0x0678-0x067b] [ 0.846146] pnp 00:09: [irq 5] [ 0.846234] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.846386] pnp 00:0a: [irq 12] [ 0.846435] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.846481] pnp 00:0b: [io 0x0060] [ 0.846484] pnp 00:0b: [io 0x0064] [ 0.846492] pnp 00:0b: [irq 1] [ 0.846542] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.846604] pnp 00:0c: [io 0x0400-0x04bf] [ 0.846682] system 00:0c: [io 0x0400-0x04bf] has been reserved [ 0.847083] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.847123] pnp 00:0d: [mem 0xffb80000-0xffbfffff] [ 0.847169] pnp 00:0d: Plug and Play ACPI device, IDs INT0800 (active) [ 0.847665] pnp 00:0e: [mem 0x000d1000-0x000d3fff] [ 0.847669] pnp 00:0e: [mem 0x000f0000-0x000f7fff] [ 0.847671] pnp 00:0e: [mem 0x000f8000-0x000fbfff] [ 0.847674] pnp 00:0e: [mem 0x000fc000-0x000fffff] [ 0.847677] pnp 00:0e: [mem 0x7fef0000-0x7fefffff] [ 0.847679] pnp 00:0e: [mem 0x00000000-0x0009ffff] [ 0.847682] pnp 00:0e: [mem 0x00100000-0x7feeffff] [ 0.847685] pnp 00:0e: [mem 0xfec00000-0xfec00fff] [ 0.847687] pnp 00:0e: [mem 0xfec01000-0xfed8ffff] [ 0.847690] pnp 00:0e: [mem 0xfee00000-0xfee00fff] [ 0.847693] pnp 00:0e: [mem 0xffb00000-0xffb7ffff] [ 0.847695] pnp 00:0e: [mem 0xfff00000-0xffffffff] [ 0.847698] pnp 00:0e: [mem 0x000e0000-0x000effff] [ 0.847799] system 00:0e: [mem 0x000d1000-0x000d3fff] has been reserved [ 0.848240] system 00:0e: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.848638] system 00:0e: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.849042] system 00:0e: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.849448] system 00:0e: [mem 0x7fef0000-0x7fefffff] could not be reserved [ 0.849856] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.850263] system 00:0e: [mem 0x00100000-0x7feeffff] could not be reserved [ 0.850659] system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.851054] system 00:0e: [mem 0xfec01000-0xfed8ffff] could not be reserved [ 0.851450] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.851850] system 00:0e: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.852269] system 00:0e: [mem 0xfff00000-0xffffffff] has been reserved [ 0.852669] system 00:0e: [mem 0x000e0000-0x000effff] has been reserved [ 0.853072] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.853087] pnp: PnP ACPI: found 15 devices [ 0.853480] ACPI: ACPI bus type pnp unregistered [ 0.853873] PnPBIOS: Disabled by ACPI PNP [ 0.891616] PCI: max bus depth: 1 pci_try_num: 2 [ 0.891643] pci 0000:00:1f.1: BAR 5: assigned [mem 0x80000000-0x800003ff] [ 0.892067] pci 0000:00:1f.1: BAR 5: set to [mem 0x80000000-0x800003ff] (PCI address [0x80000000-0x800003ff]) [ 0.892805] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa01ffff pref] [ 0.893534] pci 0000:01:0b.0: BAR 6: assigned [mem 0xfa030000-0xfa03ffff pref] [ 0.894265] pci 0000:00:1e.0: PCI bridge to [bus 01-01] [ 0.894663] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 0.895065] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfaffffff] [ 0.895466] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xefffffff pref] [ 0.896223] pci 0000:00:1e.0: setting latency timer to 64 [ 0.896229] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.896232] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff] [ 0.896235] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.896238] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfaffffff] [ 0.896241] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff pref] [ 0.896244] pci_bus 0000:01: resource 4 [io 0x0000-0xffff] [ 0.896247] pci_bus 0000:01: resource 5 [mem 0x00000000-0xfffffffff] [ 0.896323] NET: Registered protocol family 2 [ 0.896822] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.897596] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.898958] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.899676] TCP: Hash tables configured (established 131072 bind 65536) [ 0.900125] TCP reno registered [ 0.900521] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.900939] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.901575] NET: Registered protocol family 1 [ 0.902105] pci 0000:01:00.0: Boot video device [ 0.902115] PCI: CLS 32 bytes, default 64 [ 0.902247] kvm: no hardware support [ 0.903060] audit: initializing netlink socket (disabled) [ 0.903470] type=2000 audit(1316973352.900:1): initialized [ 0.933316] highmem bounce pool size: 64 pages [ 0.933716] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.943196] VFS: Disk quotas dquot_6.5.2 [ 0.943669] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.944394] DLM installed [ 0.944916] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.945404] NTFS driver 2.1.30 [Flags: R/W]. [ 0.945823] fuse init (API version 7.16) [ 0.946318] msgmni has been set to 1712 [ 0.947137] alg: No test for stdrng (krng) [ 0.947535] async_tx: api initialized (async) [ 0.947985] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.948751] io scheduler noop registered [ 0.949145] io scheduler deadline registered [ 0.949562] io scheduler cfq registered (default) [ 0.950111] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.950547] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.951075] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.951820] ACPI: Power Button [PWRB] [ 0.952370] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.953098] ACPI: Power Button [PWRF] [ 0.953562] ACPI: Fan [FAN] (on) [ 0.953982] ACPI: acpi_idle registered with cpuidle [ 0.956306] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.956702] ACPI: Thermal Zone [THRM] (40 C) [ 0.957109] ERST: Table is not found! [ 0.957523] isapnp: Scanning for PnP cards... [ 1.311958] isapnp: No Plug & Play device found [ 1.312381] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 1.312976] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.333696] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.354441] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.375489] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.396325] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.397093] Non-volatile memory driver v1.3 [ 1.397651] ppdev: user-space parallel port driver [ 1.398048] Linux agpgart interface v0.103 [ 1.398515] [drm] Initialized drm 1.1.0 20060810 [ 1.399036] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.401652] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x04a100a1) [ 1.405289] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 1.529105] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 1.529502] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 1.529894] [drm] nouveau 0000:01:00.0: Bios version 05.44.a2.10 [ 1.530288] [drm] nouveau 0000:01:00.0: TMDS table version 1.1 [ 1.530682] [drm] nouveau 0000:01:00.0: BIT table 'd' not found [ 1.531079] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0 [ 1.531807] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028 [ 1.532227] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011310 00000028 [ 1.532624] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01011312 00000000 [ 1.533019] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 020223f1 00c0c080 [ 1.533418] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 7 2 [ 1.533819] [drm] nouveau 0000:01:00.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff [ 1.534544] [drm] nouveau 0000:01:00.0: 1: 0x00002230: type 0x30 idx 1 tag 0x08 [ 1.535267] [drm] nouveau 0000:01:00.0: 2: 0x00000110: type 0x10 idx 2 tag 0xff [ 1.535990] [drm] nouveau 0000:01:00.0: 3: 0x00000111: type 0x11 idx 3 tag 0xff [ 1.536739] [drm] nouveau 0000:01:00.0: 4: 0x00000113: type 0x13 idx 4 tag 0xff [ 1.537479] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDEB0 [ 1.540569] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE19E [ 1.554432] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE6D8 [ 1.555187] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE835 [ 1.557043] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE9BE [ 1.557779] [drm] nouveau 0000:01:00.0: mem timing table length unknown: 14 [ 1.558178] [drm] nouveau 0000:01:00.0: timingset 255 does not exist [ 1.578123] [drm] nouveau 0000:01:00.0: 1 available performance level(s) [ 1.578527] [drm] nouveau 0000:01:00.0: 0: memory 532MHz core 350MHz fanspeed 100% [ 1.579268] [drm] nouveau 0000:01:00.0: c: memory 265MHz core 200MHz [ 1.579773] [TTM] Zone kernel: Available graphics memory: 438438 kiB. [ 1.580199] [TTM] Zone highmem: Available graphics memory: 1030794 kiB. [ 1.580594] [TTM] Initializing pool allocator. [ 1.581009] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM [ 1.583233] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture) [ 1.583751] [drm] nouveau 0000:01:00.0: Saving VGA fonts [ 1.683425] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 1.683782] [drm] No driver support for vblank timestamp query. [ 1.685743] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 1.686430] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [ 1.687067] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2) [ 1.687707] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 1.931191] Refined TSC clocksource calibration: 3057.953 MHz. [ 1.931548] Switching to clocksource tsc [ 1.957307] [drm] nouveau 0000:01:00.0: allocated 1680x1050 fb: 0x49000, bo f5beb400 [ 1.958034] fbcon: nouveaufb (fb0) is primary device [ 1.975966] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [ 1.975972] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A [ 1.986901] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [ 1.986906] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 1 using output B [ 1.998754] Console: switching to colour frame buffer device 160x64 [ 2.006320] fb0: nouveaufb frame buffer device [ 2.006358] drm: registered panic notifier [ 2.006411] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [ 2.006569] parport_pc 00:09: reported by Plug and Play ACPI [ 2.006642] parport0: PC-style at 0x278, irq 5 [PCSPP,TRISTATE] [ 2.100368] parport_pc 0000:01:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.100394] PCI parallel port detected: 9710:9805, I/O at 0xd000(0xd100), IRQ 17 [ 2.100432] parport1: PC-style at 0xd000 (0xd100), irq 17 [PCSPP,TRISTATE] [ 2.215803] FDC 0 is a post-1991 82077 [ 2.217789] loop: module loaded [ 2.217913] ata_piix 0000:00:1f.1: version 2.13 [ 2.217939] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.218018] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 2.218464] scsi0 : ata_piix [ 2.218634] scsi1 : ata_piix [ 2.219532] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 2.219552] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 2.219604] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.219626] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] [ 2.219701] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 2.220344] scsi2 : ata_piix [ 2.220482] scsi3 : ata_piix [ 2.221267] ata3: SATA max UDMA/133 cmd 0xe500 ctl 0xe600 bmdma 0xe900 irq 18 [ 2.221287] ata4: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xe908 irq 18 [ 2.221441] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.14 (Mar 30, 2011) [ 2.221556] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 2.221579] 8139cp 0000:01:0b.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 2.221633] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 2.221683] 8139too 0000:01:0b.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.222390] 8139too 0000:01:0b.0: eth0: RealTek RTL8139 at 0xd600, 00:16:17:3c:85:76, IRQ 23 [ 2.222436] tun: Universal TUN/TAP device driver, 1.6 [ 2.222448] tun: (C) 1999-2004 Max Krasnyansky [ 2.222549] Solarflare NET driver v3.1 [ 2.223040] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.223096] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 2.223138] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.223144] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.223266] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 2.227214] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.227243] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb080000 [ 2.240018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.240747] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.243318] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.246611] usb usb1: Product: EHCI Host Controller [ 2.249993] usb usb1: Manufacturer: Linux 3.0.4 ehci_hcd [ 2.253362] usb usb1: SerialNumber: 0000:00:1d.7 [ 2.256604] hub 1-0:1.0: USB hub found [ 2.259654] hub 1-0:1.0: 8 ports detected [ 2.262895] uhci_hcd: USB Universal Host Controller Interface driver [ 2.266245] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.269565] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.269571] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.272684] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.275942] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e000 [ 2.278999] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.282235] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.285506] usb usb2: Product: UHCI Host Controller [ 2.288613] usb usb2: Manufacturer: Linux 3.0.4 uhci_hcd [ 2.291520] usb usb2: SerialNumber: 0000:00:1d.0 [ 2.294574] hub 2-0:1.0: USB hub found [ 2.297504] hub 2-0:1.0: 2 ports detected [ 2.300706] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.303670] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.303675] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.306570] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.309581] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e100 [ 2.312314] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.315272] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.318358] usb usb3: Product: UHCI Host Controller [ 2.321417] usb usb3: Manufacturer: Linux 3.0.4 uhci_hcd [ 2.324190] usb usb3: SerialNumber: 0000:00:1d.1 [ 2.326974] hub 3-0:1.0: USB hub found [ 2.329758] hub 3-0:1.0: 2 ports detected [ 2.332785] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.335648] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.335653] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.338677] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.341297] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e200 [ 2.343858] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.346748] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.349653] usb usb4: Product: UHCI Host Controller [ 2.352575] usb usb4: Manufacturer: Linux 3.0.4 uhci_hcd [ 2.355378] usb usb4: SerialNumber: 0000:00:1d.2 [ 2.358261] hub 4-0:1.0: USB hub found [ 2.360621] hub 4-0:1.0: 2 ports detected [ 2.363493] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.366368] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 2.366374] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.369332] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 2.372061] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e300 [ 2.374738] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.377297] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.380173] usb usb5: Product: UHCI Host Controller [ 2.383045] usb usb5: Manufacturer: Linux 3.0.4 uhci_hcd [ 2.385961] usb usb5: SerialNumber: 0000:00:1d.3 [ 2.389468] hub 5-0:1.0: USB hub found [ 2.391286] hub 5-0:1.0: 2 ports detected [ 2.394507] usbcore: registered new interface driver uas [ 2.396506] Initializing USB Mass Storage driver... [ 2.399566] usbcore: registered new interface driver usb-storage [ 2.402000] USB Mass Storage support registered. [ 2.405473] ata1.01: ATA-6: WDC WD800BB-55JHC0, 05.01C05, max UDMA/100 [ 2.407191] ata1.01: 156301488 sectors, multi 16: LBA [ 2.409818] ata2.00: ATA-6: WDC WD2500JB-00EVA0, 15.05R15, max UDMA/100 [ 2.412304] ata2.00: 488397168 sectors, multi 16: LBA48 [ 2.415136] ata4.00: ATA-8: WDC WD15EARS-00MVWB0, 51.0AB51, max UDMA/133 [ 2.417820] ata4.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.421047] ata3.00: ATA-8: WDC WD15EARS-00MVWB0, 51.0AB51, max UDMA/133 [ 2.423051] ata3.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.426019] usbcore: registered new interface driver appledisplay [ 2.428549] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.432300] ata1.01: configured for UDMA/100 [ 2.434017] scsi 0:0:1:0: Direct-Access ATA WDC WD800BB-55JH 05.0 PQ: 0 ANSI: 5 [ 2.437205] sd 0:0:1:0: Attached scsi generic sg0 type 0 [ 2.439635] ata2.01: ATA-5: WDC WD800BB-00CAA1, 17.07W17, max UDMA/100 [ 2.442278] ata2.01: 156301488 sectors, multi 16: LBA [ 2.445431] sd 0:0:1:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 2.447849] ata3.00: configured for UDMA/133 [ 2.450820] ata4.00: configured for UDMA/133 [ 2.454134] sd 0:0:1:0: [sda] Write Protect is off [ 2.456373] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 2.457134] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.459276] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.462077] mousedev: PS/2 mouse device common for all mice [ 2.464816] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.468639] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 2.470808] rtc_cmos 00:03: RTC can wake from S4 [ 2.473983] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 2.476310] ata2.00: configured for UDMA/100 [ 2.479186] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 2.482193] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.485439] md: raid1 personality registered for level 1 [ 2.488211] md: raid6 personality registered for level 6 [ 2.490878] md: raid5 personality registered for level 5 [ 2.493501] md: raid4 personality registered for level 4 [ 2.496868] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 2.499513] ata2.01: configured for UDMA/100 [ 2.502693] scsi 1:0:0:0: Direct-Access ATA WDC WD2500JB-00E 15.0 PQ: 0 ANSI: 5 [ 2.505659] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.508412] sda: sda1 sda2 [ 2.511465] sd 1:0:0:0: [sdb] Write Protect is off [ 2.514172] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.514251] cpuidle: using governor ladder [ 2.517796] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.520428] sd 0:0:1:0: [sda] Attached SCSI disk [ 2.523227] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.526258] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.529366] scsi 1:0:1:0: Direct-Access ATA WDC WD800BB-00CA 17.0 PQ: 0 ANSI: 5 [ 2.532323] cpuidle: using governor menu [ 2.535767] usbcore: registered new interface driver usbhid [ 2.538655] usbhid: USB HID core driver [ 2.542615] sd 1:0:1:0: Attached scsi generic sg2 type 0 [ 2.544827] scsi 2:0:0:0: Direct-Access ATA WDC WD15EARS-00M 51.0 PQ: 0 ANSI: 5 [ 2.548268] sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 2.551815] sd 2:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 2.554694] sd 2:0:0:0: [sdd] Write Protect is off [ 2.557558] sd 2:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.557859] scsi 3:0:0:0: Direct-Access ATA WDC WD15EARS-00M 51.0 PQ: 0 ANSI: 5 [ 2.560938] sd 3:0:0:0: Attached scsi generic sg4 type 0 [ 2.564164] sd 3:0:0:0: [sde] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 2.567873] TCP cubic registered [ 2.570747] sd 2:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.573950] usb 1-2: new high speed USB device number 2 using ehci_hcd [ 2.576996] sdb: sdb1 sdb2 [ 2.580534] sd 1:0:1:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 2.584408] sd 3:0:0:0: [sde] Write Protect is off [ 2.587640] sd 3:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 2.588107] sd 1:0:1:0: [sdc] Write Protect is off [ 2.590877] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.591077] NET: Registered protocol family 10 [ 2.594251] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.598252] sd 3:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.601163] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.606067] Mobile IPv6 [ 2.607835] NET: Registered protocol family 17 [ 2.612772] sctp: Hash tables configured (established 65536 bind 65536) [ 2.614752] Registering the dns_resolver key type [ 2.618519] Using IPI No-Shortcut mode [ 2.621734] sdd: sdd1 sdd2 [ 2.625267] sde: sde1 sde2 [ 2.628697] PM: Hibernation image not present or could not be loaded. [ 2.628724] registered taskstats version 1 [ 2.635933] sd 3:0:0:0: [sde] Attached SCSI disk [ 2.637092] sd 2:0:0:0: [sdd] Attached SCSI disk [ 2.639419] rtc_cmos 00:03: setting system clock to 2011-09-25 17:55:54 UTC (1316973354) [ 2.642876] ondemand governor failed, too long transition latency of HW, fallback to performance governor [ 2.645538] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available [ 2.649095] Initializing network drop monitor service [ 2.652411] sdc: sdc1 sdc2 [ 2.656251] sd 1:0:1:0: [sdc] Attached SCSI disk [ 2.728318] usb 1-2: New USB device found, idVendor=4971, idProduct=cb01 [ 2.729000] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [ 2.731974] usb 1-2: Product: USB Mass Storage Device [ 2.735397] usb 1-2: Manufacturer: Genesyslogic [ 2.738598] usb 1-2: SerialNumber: 0904100025 [ 2.742473] scsi4 : usb-storage 1-2:1.0 [ 2.968019] usb 1-5: new high speed USB device number 4 using ehci_hcd [ 3.101817] usb 1-5: New USB device found, idVendor=0781, idProduct=5150 [ 3.102460] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.105138] usb 1-5: Product: Cruzer Mini [ 3.108241] usb 1-5: Manufacturer: SanDisk Corporation [ 3.111209] usb 1-5: SerialNumber: SNDK5023A525CC608703 [ 3.115102] scsi5 : usb-storage 1-5:1.0 [ 3.228018] usb 1-7: new high speed USB device number 5 using ehci_hcd [ 3.372693] usb 1-7: New USB device found, idVendor=0a48, idProduct=3220 [ 3.373336] usb 1-7: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [ 3.375785] usb 1-7: Product: MEDIA BAY USB2.0 [ 3.379132] usb 1-7: Manufacturer: IOI [ 3.382235] usb 1-7: SerialNumber: 00059 [ 3.386338] scsi6 : usb-storage 1-7:1.0 [ 3.556099] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 3.561901] md: Waiting for all devices to be available before autodetect [ 3.562537] md: If you don't use raid, use raid=noautodetect [ 3.565499] md: Autodetecting RAID arrays. [ 3.569113] md: invalid raid superblock magic on sda1 [ 3.571455] md: sda1 does not have a valid v0.90 superblock, not importing! [ 3.600985] md: invalid raid superblock magic on sdb2 [ 3.601603] md: sdb2 does not have a valid v0.90 superblock, not importing! [ 3.628026] usb 3-1: new full speed USB device number 2 using uhci_hcd [ 3.644479] md: invalid raid superblock magic on sde2 [ 3.645093] md: sde2 does not have a valid v0.90 superblock, not importing! [ 3.688504] md: invalid raid superblock magic on sdd2 [ 3.689119] md: sdd2 does not have a valid v0.90 superblock, not importing! [ 3.694268] md: Scanned 5 and added 1 devices. [ 3.694886] md: autorun ... [ 3.697354] md: considering sdc1 ... [ 3.700376] md: adding sdc1 ... [ 3.703385] md: created md0 [ 3.706046] md: bind [ 3.708578] md: running: [ 3.711576] bio: create slab at 1 [ 3.714391] md/raid1:md0: active with 1 out of 2 mirrors [ 3.717129] md0: detected capacity change from 0 to 79249408000 [ 3.719938] md: ... autorun DONE. [ 3.745975] scsi 4:0:0:0: Direct-Access ST980815 A 0811 PQ: 0 ANSI: 0 [ 3.746855] md0: [ 3.751232] sd 4:0:0:0: Attached scsi generic sg5 type 0 [ 3.752223] sd 4:0:0:0: [sdf] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 3.755208] sd 4:0:0:0: [sdf] Test WP failed, assume Write Enabled [ 3.758085] sd 4:0:0:0: [sdf] Cache data unavailable [ 3.759408] sd 4:0:0:0: [sdf] Assuming drive cache: write through [ 3.764084] sd 4:0:0:0: [sdf] Test WP failed, assume Write Enabled [ 3.765958] sd 4:0:0:0: [sdf] Cache data unavailable [ 3.767870] sd 4:0:0:0: [sdf] Assuming drive cache: write through [ 3.782219] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 3.782853] VFS: Mounted root (ext4 filesystem) readonly on device 9:0. [ 3.821295] usb 3-1: New USB device found, idVendor=1532, idProduct=010e [ 3.821884] usb 3-1: New USB device strings: Mfr=1, Product=1, SerialNumber=0 [ 3.823653] usb 3-1: Product: Razer BlackWidow [ 3.826178] usb 3-1: Manufacturer: Razer BlackWidow [ 3.834683] input: Razer BlackWidow Razer BlackWidow as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input5 [ 3.835494] generic-usb 0003:1532:010E.0001: input,hidraw0: USB HID v1.11 Keyboard [Razer BlackWidow Razer BlackWidow] on usb-0000:00:1d.1-1/input0 [ 3.841453] input: Razer BlackWidow Razer BlackWidow as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input6 [ 3.842271] generic-usb 0003:1532:010E.0002: input,hidraw1: USB HID v1.11 Device [Razer BlackWidow Razer BlackWidow] on usb-0000:00:1d.1-1/input1 [ 3.844896] sdf: sdf1 [ 3.849730] sd 4:0:0:0: [sdf] Test WP failed, assume Write Enabled [ 3.851469] input: Razer BlackWidow Razer BlackWidow as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.2/input/input7 [ 3.854234] sd 4:0:0:0: [sdf] Cache data unavailable [ 3.856988] sd 4:0:0:0: [sdf] Assuming drive cache: write through [ 3.859815] sd 4:0:0:0: [sdf] Attached SCSI disk [ 3.863098] Freeing unused kernel memory: 444k freed [ 3.866810] generic-usb 0003:1532:010E.0003: input,hidraw2: USB HID v1.11 Mouse [Razer BlackWidow Razer BlackWidow] on usb-0000:00:1d.1-1/input2 [ 3.869689] Write protecting the kernel text: 4976k [ 3.872718] Write protecting the kernel read-only data: 1844k [ 3.875610] NX-protecting the kernel data: 3216k [ 4.116726] scsi 5:0:0:0: Direct-Access SanDisk Cruzer Mini 0.2 PQ: 0 ANSI: 2 [ 4.118254] sd 5:0:0:0: Attached scsi generic sg6 type 0 [ 4.120844] sd 5:0:0:0: [sdg] 2001888 512-byte logical blocks: (1.02 GB/977 MiB) [ 4.124717] sd 5:0:0:0: [sdg] Write Protect is off [ 4.126541] sd 5:0:0:0: [sdg] Mode Sense: 03 00 00 00 [ 4.127332] sd 5:0:0:0: [sdg] No Caching mode page present [ 4.130013] sd 5:0:0:0: [sdg] Assuming drive cache: write through [ 4.136828] sd 5:0:0:0: [sdg] No Caching mode page present [ 4.137500] sd 5:0:0:0: [sdg] Assuming drive cache: write through [ 4.141250] sdg: sdg1 [ 4.145826] sd 5:0:0:0: [sdg] No Caching mode page present [ 4.146625] sd 5:0:0:0: [sdg] Assuming drive cache: write through [ 4.149985] sd 5:0:0:0: [sdg] Attached SCSI removable disk [ 4.389475] scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE 0113 PQ: 0 ANSI: 0 [ 4.393874] scsi 6:0:0:1: Direct-Access Generic STORAGE DEVICE 0113 PQ: 0 ANSI: 0 [ 4.395482] scsi 6:0:0:2: Direct-Access Generic STORAGE DEVICE 0113 PQ: 0 ANSI: 0 [ 4.398472] scsi 6:0:0:3: Direct-Access Generic STORAGE DEVICE 0113 PQ: 0 ANSI: 0 [ 4.401632] sd 6:0:0:0: Attached scsi generic sg7 type 0 [ 4.404477] sd 6:0:0:1: Attached scsi generic sg8 type 0 [ 4.409206] sd 6:0:0:2: Attached scsi generic sg9 type 0 [ 4.410543] sd 6:0:0:3: Attached scsi generic sg10 type 0 [ 4.421461] sd 6:0:0:0: [sdh] Attached SCSI removable disk [ 4.423462] sd 6:0:0:2: [sdj] Attached SCSI removable disk [ 4.425584] sd 6:0:0:1: [sdi] Attached SCSI removable disk [ 4.430078] sd 6:0:0:3: [sdk] Attached SCSI removable disk [ 4.598680] udevd[77]: starting version 173 [ 6.248040] md: bind [ 6.258774] md: bind [ 6.276134] md/raid1:md2: active with 2 out of 2 mirrors [ 6.276823] md2: detected capacity change from 0 to 1498800419840 [ 6.283614] md: bind [ 6.288616] md/raid1:md127: active with 1 out of 2 mirrors [ 6.289288] md127: detected capacity change from 0 to 79248475648 [ 6.297804] md2: unknown partition table [ 6.303094] md127: unknown partition table [ 6.304591] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 6.305698] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 6.628019] intel8x0_measure_ac97_clock: measured 54699 usecs (2636 samples) [ 6.628672] intel8x0: clocking to 48000 [ 7.284765] EXT4-fs (md0): re-mounted. Opts: (null) [ 7.578790] EXT4-fs (md0): re-mounted. Opts: (null) [ 7.685807] EXT4-fs (md0): re-mounted. Opts: (null) [ 8.068795] EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: (null) [ 8.101232] Adding 1465100k swap on /dev/sdd1. Priority:-1 extents:1 across:1465100k [ 8.107564] Adding 1465100k swap on /dev/sde1. Priority:-2 extents:1 across:1465100k [ 8.110832] Adding 243164k swap on /dev/sdb1. Priority:-3 extents:1 across:243164k [ 8.131739] Adding 755048k swap on /dev/sdc2. Priority:-4 extents:1 across:755048k [ 8.134749] Adding 755048k swap on /dev/sda2. Priority:-5 extents:1 across:755048k