[ create a new paste ] login | about

Link: http://codepad.org/pXamBs0O    [ raw code | fork ]

Plain Text, pasted on Sep 18:
[   70.874685] Restarting system.


coreboot-4.0-1709-g8487229-dirty Sun Sep 18 15:18:55 CEST 2011 starting...



INIT detected from  --- { APICID = 00 NODEID = 00 COREID = 00} ---

Issuing SOFT_RESET...
soft reset 


coreboot-4.0-1709-g8487229-dirty Sun Sep 18 15:18:55 CEST 2011 starting...
Enabling routing table for node 00 done.
Enabling UP settings
Disabling read/write/fill probes for UP... done.
coherent_ht_finalize
done
core0 started: 
now booting... Core0 started
started ap apicid: 
SBLink=00
NC node|link=00
ht_setup_chains_x nodes: 1
entering optimize_link_incoherent_ht
sysinfo->link_pair_num=0x1
entering ht_optimize_link
pos=0x8a, unfiltered freq_cap=0x8075
pos=0x8a, filtered freq_cap=0x75
Limiting HT to 800/600/400/200 MHz until K8M890 HT1000 is fixed.
pos=0x6e, unfiltered freq_cap=0x75
pos=0x6e, filtered freq_cap=0x75
Limiting HT to 800/600/400/200 MHz until K8M890 HT1000 is fixed.
freq_cap1=0x35, freq_cap2=0x35
dev1 old_freq=0x6, freq=0x5, needs_reset=0x1
dev2 old_freq=0x6, freq=0x5, needs_reset=0x1
width_cap1=0x11, width_cap2=0x11
dev1 input ln_width1=0x4, ln_width2=0x4
dev1 input width=0x1
dev1 output ln_width1=0x4, ln_width2=0x4
dev1 input|output width=0x11
old dev1 input|output width=0x11
dev2 input|output width=0x11
old dev2 input|output width=0x11
after ht_optimize_link for link pair 0, reset_needed=0x1
after optimize_link_read_pointers_chain, reset_needed=0x1
K8M890 found at LDT 00 Agreed on width: 01 CPU programmed to HT freq: 05 VIA HT caps: 0075
ht reset -
soft reset 


coreboot-4.0-1709-g8487229-dirty Sun Sep 18 15:18:55 CEST 2011 starting...
Enabling routing table for node 00 done.
Enabling UP settings
Disabling read/write/fill probes for UP... done.
coherent_ht_finalize
done
core0 started: 
now booting... Core0 started
started ap apicid: 
SBLink=00
NC node|link=00
ht_setup_chains_x nodes: 1
entering optimize_link_incoherent_ht
sysinfo->link_pair_num=0x1
entering ht_optimize_link
pos=0x8a, unfiltered freq_cap=0x8075
pos=0x8a, filtered freq_cap=0x75
Limiting HT to 800/600/400/200 MHz until K8M890 HT1000 is fixed.
pos=0x6e, unfiltered freq_cap=0x75
pos=0x6e, filtered freq_cap=0x75
Limiting HT to 800/600/400/200 MHz until K8M890 HT1000 is fixed.
freq_cap1=0x35, freq_cap2=0x35
dev1 old_freq=0x5, freq=0x5, needs_reset=0x0
dev2 old_freq=0x5, freq=0x5, needs_reset=0x0
width_cap1=0x11, width_cap2=0x11
dev1 input ln_width1=0x4, ln_width2=0x4
dev1 input width=0x1
dev1 output ln_width1=0x4, ln_width2=0x4
dev1 input|output width=0x11
old dev1 input|output width=0x11
dev2 input|output width=0x11
old dev2 input|output width=0x11
after ht_optimize_link for link pair 0, reset_needed=0x0
after optimize_link_read_pointers_chain, reset_needed=0x0
K8M890 found at LDT 00 Agreed on width: 01 CPU programmed to HT freq: 05 VIA HT caps: 0075
after enable_fid_change
toggle LDTSTP#
done
Current fid_cur: 0xa, fid_max: 0xa
Requested fid_new: 0xa
toggle LDTSTP#
done
set vid failed for apicid =00
fill_mem_ctrl nodes: 1
POST: 0x40 /* displayed from src/lib/generic_sdram.c:19 */


Create a new paste based on this one


Comments: