/*
FreeRTOS V6.0.5 - Copyright (C) 2010 Real Time Engineers Ltd.
***************************************************************************
* *
* If you are: *
* *
* + New to FreeRTOS, *
* + Wanting to learn FreeRTOS or multitasking in general quickly *
* + Looking for basic training, *
* + Wanting to improve your FreeRTOS skills and productivity *
* *
* then take a look at the FreeRTOS eBook *
* *
* "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
* http://www.FreeRTOS.org/Documentation *
* *
* A pdf reference manual is also available. Both are usually delivered *
* to your inbox within 20 minutes to two hours when purchased between 8am *
* and 8pm GMT (although please allow up to 24 hours in case of *
* exceptional circumstances). Thank you for your support! *
* *
***************************************************************************
This file is part of the FreeRTOS distribution.
FreeRTOS is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License (version 2) as published by the
Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
***NOTE*** The exception to the GPL is included to allow you to distribute
a combined work that includes FreeRTOS without being obliged to provide the
source code for proprietary components outside of the FreeRTOS kernel.
FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details. You should have received a copy of the GNU General Public
License and the FreeRTOS license exception along with FreeRTOS; if not it
can be viewed here: http://www.freertos.org/a00114.html and also obtained
by writing to Richard Barry, contact details for whom are available on the
FreeRTOS WEB site.
1 tab == 4 spaces!
http://www.FreeRTOS.org - Documentation, latest information, license and
contact details.
http://www.SafeRTOS.com - A version that is certified for use in safety
critical systems.
http://www.OpenRTOS.com - Commercial support, development, porting,
licensing and training services.
*/
#ifndef PORTMACRO_H
#define PORTMACRO_H
#ifdef __cplusplus
extern "C" {
#endif
/*-----------------------------------------------------------
* Port specific definitions.
*
* The settings in this file configure FreeRTOS correctly for the
* given hardware and compiler.
*
* These settings should not be altered.
*-----------------------------------------------------------
*/
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE unsigned portLONG
#define portBASE_TYPE portLONG
#if( configUSE_16_BIT_TICKS == 1 )
typedef unsigned portSHORT portTickType;
#define portMAX_DELAY ( portTickType ) 0xffff
#else
typedef unsigned portLONG portTickType;
#define portMAX_DELAY ( portTickType ) 0xffffffff
#endif
/*-----------------------------------------------------------*/
/* Architecture specifics. */
#define portSTACK_GROWTH ( -1 )
#define portTICK_RATE_MS ( ( portTickType ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 8
#define portNOP() __asm volatile ( "NOP" );
/*-----------------------------------------------------------*/
/* Scheduler utilities. */
/*
* portRESTORE_CONTEXT, portRESTORE_CONTEXT, portENTER_SWITCHING_ISR
* and portEXIT_SWITCHING_ISR can only be called from ARM mode, but
* are included here for efficiency. An attempt to call one from
* THUMB mode code will result in a compile time error.
*/
#define portRESTORE_CONTEXT() \
{ \
extern volatile void * volatile pxCurrentTCB; \
extern volatile unsigned portLONG ulCriticalNesting; \
\
/* Set the LR to the task stack. */ \
__asm volatile ( \
"LDR R0, =pxCurrentTCB \n\t" \
"LDR R0, [R0] \n\t" \
"LDR LR, [R0] \n\t" \
\
/* The critical nesting depth is the first item on the stack. */ \
/* Load it into the ulCriticalNesting variable. */ \
"LDR R0, =ulCriticalNesting \n\t" \
"LDMFD LR!, {R1} \n\t" \
"STR R1, [R0] \n\t" \
\
/* Get the SPSR from the stack. */ \
"LDMFD LR!, {R0} \n\t" \
"MSR SPSR, R0 \n\t" \
\
/* Restore all system mode registers for the task. */ \
"LDMFD LR, {R0-R14}^ \n\t" \
"NOP \n\t" \
\
/* Restore the return address. */ \
"LDR LR, [LR, #+60] \n\t" \
\
/* And return - correcting the offset in the LR to obtain the */ \
/* correct address. */ \
"SUBS PC, LR, #4 \n\t" \
); \
( void ) ulCriticalNesting; \
( void ) pxCurrentTCB; \
}
/*-----------------------------------------------------------*/
#define portSAVE_CONTEXT() \
{ \
extern volatile void * volatile pxCurrentTCB; \
extern volatile unsigned portLONG ulCriticalNesting; \
\
/* Push R0 as we are going to use the register. */ \
__asm volatile ( \
"STMDB SP!, {R0} \n\t" \
\
/* Set R0 to point to the task stack pointer. */ \
"STMDB SP,{SP}^ \n\t" \
"NOP \n\t" \
"SUB SP, SP, #4 \n\t" \
"LDMIA SP!,{R0} \n\t" \
\
/* Push the return address onto the stack. */ \
"STMDB R0!, {LR} \n\t" \
\
/* Now we have saved LR we can use it instead of R0. */ \
"MOV LR, R0 \n\t" \
\
/* Pop R0 so we can save it onto the system mode stack. */ \
"LDMIA SP!, {R0} \n\t" \
\
/* Push all the system mode registers onto the task stack. */ \
"STMDB LR,{R0-LR}^ \n\t" \
"NOP \n\t" \
"SUB LR, LR, #60 \n\t" \
\
/* Push the SPSR onto the task stack. */ \
"MRS R0, SPSR \n\t" \
"STMDB LR!, {R0} \n\t" \
\
"LDR R0, =ulCriticalNesting \n\t" \
"LDR R0, [R0] \n\t" \
"STMDB LR!, {R0} \n\t" \
\
/* Store the new top of stack for the task. */ \
"LDR R0, =pxCurrentTCB \n\t" \
"LDR R0, [R0] \n\t" \
"STR LR, [R0] \n\t" \
); \
( void ) ulCriticalNesting; \
( void ) pxCurrentTCB; \
}
extern void vTaskSwitchContext( void );
#define portYIELD_FROM_ISR() vTaskSwitchContext()
#define portYIELD() __asm volatile ( "SWI 0" )
/*-----------------------------------------------------------*/
/* Critical section management. */
/*
* The interrupt management utilities can only be called from ARM mode. When
* THUMB_INTERWORK is defined the utilities are defined as functions in
* portISR.c to ensure a switch to ARM mode. When THUMB_INTERWORK is not
* defined then the utilities are defined as macros here - as per other ports.
*/
#ifdef THUMB_INTERWORK
extern void vPortDisableInterruptsFromThumb( void ) __attribute__ ((naked));
extern void vPortEnableInterruptsFromThumb( void ) __attribute__ ((naked));
#define portDISABLE_INTERRUPTS() vPortDisableInterruptsFromThumb()
#define portENABLE_INTERRUPTS() vPortEnableInterruptsFromThumb()
#else
#define portDISABLE_INTERRUPTS() \
__asm volatile ( \
"STMDB SP!, {R0} \n\t" /* Push R0. */ \
"MRS R0, CPSR \n\t" /* Get CPSR. */ \
"ORR R0, R0, #0xC0 \n\t" /* Disable IRQ, FIQ. */ \
"MSR CPSR, R0 \n\t" /* Write back modified value. */ \
"LDMIA SP!, {R0} " ) /* Pop R0. */
#define portENABLE_INTERRUPTS() \
__asm volatile ( \
"STMDB SP!, {R0} \n\t" /* Push R0. */ \
"MRS R0, CPSR \n\t" /* Get CPSR. */ \
"BIC R0, R0, #0xC0 \n\t" /* Enable IRQ, FIQ. */ \
"MSR CPSR, R0 \n\t" /* Write back modified value. */ \
"LDMIA SP!, {R0} " ) /* Pop R0. */
#endif /* THUMB_INTERWORK */
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
#define portENTER_CRITICAL() vPortEnterCritical();
#define portEXIT_CRITICAL() vPortExitCritical();
/*-----------------------------------------------------------*/
/* EIC utilities. */
#define portEIC_CICR_ADDR *( ( unsigned portLONG * ) 0xFFFFF804 )
#define portEIC_IPR_ADDR *( ( unsigned portLONG * ) 0xFFFFF840 )
#define portCLEAR_EIC() portEIC_IPR_ADDR = 0x01 << portEIC_CICR_ADDR
/*-----------------------------------------------------------*/
/* Task function macros as described on the FreeRTOS.org WEB site. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
#ifdef __cplusplus
}
#endif
#endif /* PORTMACRO_H */