HELLO! BOOT0 is starting!
boot0 version : 2.3.7�
reg_val=0x00000000
ss =0x00000000
[DRAM]ver 1.02 clk = 312
cpu 0 pmu 0
Found PMU:AXP221
ddr vol 1500mV
dram size =2048
Ready to disable icache.
Succeed in loading Boot1.
Jump to Boot1.
[       0.226] boot1 version : 2.3.7
[       0.231] script installed ok
[       0.232] PMU: AXP221
[       0.232] bat ratio = 100
[       0.234] dcdc3 1260
[       0.279] pll1 1008
[       0.320] power finish
[       0.320] key
[       0.331] fel key max not found, try old mode
[       0.331] no key found
[       0.336] dcdc1 3300
[       0.337] dcdc2 1200
[       0.337] dcdc4 1200
[       0.339] dcdc5 1500
[       0.342] flash init start
[       0.413] flash init finish
[       0.446] fs init ok
[       0.448] fattype FAT16
[       0.448] fs mount ok
[       0.459] dram_para_set start
[       0.462] dram_para_set end
[       0.462] type=48
[       0.492] 0
[       0.674] boot_disp.output_type=3
[       0.674] boot_disp.output_mode=5
[       0.676] boot_disp.auto_hpd=1
[       0.679] hdmi open
[       0.681] DRV_hdmi_set_display_mode,mode:5
[       0.686] DRV_hdmi_open
[       0.793] power status = 3
[       0.793] power start cause = 0
[       0.794] axp buffer 0x00000000
[       0.797] power trigger
[       0.800] startup status = 1
[       0.814] parser bmp file c:\os_show\bat0.bmp failed
[       1.315] base bat_cal = 100
[       1.315] usb start detect
[       1.315] usb enter detect
[       1.319] USB Device!!
[       1.376] usb irq 0x00000001
[       2.320] timer irq ,set dc
[       2.522] usb exit detect
[       2.523] power_limit_detect_enter
[       2.523] power found
[       2.535] ERR: Parse_Pic_BMP failed
[       5.547] extenal power low go high startup
[       5.547] enter standby
[       5.548] usb exit detect