/**
* Copyright (c) 2016 - 2017, Nordic Semiconductor ASA
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form, except as embedded into a Nordic
* Semiconductor ASA integrated circuit in a product or a software update for
* such product, must reproduce the above copyright notice, this list of
* conditions and the following disclaimer in the documentation and/or other
* materials provided with the distribution.
*
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* 4. This software, with or without modification, must only be used with a
* Nordic Semiconductor ASA integrated circuit.
*
* 5. Any software provided in binary form under this license must not be reverse
* engineered, decompiled, modified and/or disassembled.
*
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#include <stdio.h>
#include <stdint.h>
#include <stdbool.h>
#include "nordic_common.h"
#include "app_error.h"
#include "app_uart.h"
#include "ble_db_discovery.h"
#include "app_timer.h"
#include "app_util.h"
#include "bsp_btn_ble.h"
#include "ble.h"
#include "ble_gap.h"
#include "ble_hci.h"
#include "nrf_sdh.h"
#include "nrf_sdh_ble.h"
#include "nrf_sdh_soc.h"
#include "nrf_pwr_mgmt.h"
#include "ble_advdata.h"
#include "ble_nus_c.h"
#include "ble_conn_params.h"
#include "ble_conn_state.h"
#include "nrf_ble_gatt.h"
#include "nrf_log.h"
#include "nrf_log_ctrl.h"
#include "nrf_log_default_backends.h"
#define CENTRAL_LINK_COUNT 2 /**< Number of central links used by the application. When changing this number remember to adjust the RAM settings*/
#define PERIPHERAL_LINK_COUNT 0 /**< Number of peripheral links used by the application. When changing this number remember to adjust the RAM settings*/
#define TOTAL_LINK_COUNT 2
#define CENTRAL_CONNECTED_LED 1
#define APP_BLE_CONN_CFG_TAG 1 /**< A tag that refers to the BLE stack configuration we set with @ref sd_ble_cfg_set. Default tag is @ref BLE_CONN_CFG_TAG_DEFAULT. */
#define APP_BLE_OBSERVER_PRIO 1 /**< Application's BLE observer priority. You shoulnd't need to modify this value. */
#define UART_TX_BUF_SIZE 256 /**< UART TX buffer size. */
#define UART_RX_BUF_SIZE 256 /**< UART RX buffer size. */
#define NUS_SERVICE_UUID_TYPE BLE_UUID_TYPE_VENDOR_BEGIN /**< UUID type for the Nordic UART Service (vendor specific). */
#define SCAN_INTERVAL 0x00A0 /**< Determines scan interval in units of 0.625 millisecond. */
#define SCAN_WINDOW 0x0050 /**< Determines scan window in units of 0.625 millisecond. */
#define SCAN_TIMEOUT 0x0000 /**< Timout when scanning. 0x0000 disables timeout. */
#define MIN_CONNECTION_INTERVAL MSEC_TO_UNITS(20, UNIT_1_25_MS) /**< Determines minimum connection interval in millisecond. */
#define MAX_CONNECTION_INTERVAL MSEC_TO_UNITS(75, UNIT_1_25_MS) /**< Determines maximum connection interval in millisecond. */
#define SLAVE_LATENCY 0 /**< Determines slave latency in counts of connection events. */
#define SUPERVISION_TIMEOUT MSEC_TO_UNITS(4000, UNIT_10_MS) /**< Determines supervision time-out in units of 10 millisecond. */
#define UUID16_SIZE 2 /**< Size of 16 bit UUID */
#define UUID32_SIZE 4 /**< Size of 32 bit UUID */
#define UUID128_SIZE 16 /**< Size of 128 bit UUID */
#define ECHOBACK_BLE_UART_DATA 1 /**< Echo the UART data that is received over the Nordic UART Service back to the sender. */
NRF_BLE_GATT_DEF(m_gatt); /**< GATT module instance. */
BLE_NUS_C_ARRAY_DEF(m_ble_nus_c,TOTAL_LINK_COUNT); /**< BLE NUS service client instance. */
BLE_DB_DISCOVERY_ARRAY_DEF(m_db_disc, TOTAL_LINK_COUNT); /**< DB discovery module instance. */
static uint16_t m_ble_nus_max_data_len = BLE_GATT_ATT_MTU_DEFAULT - OPCODE_LENGTH - HANDLE_LENGTH; /**< Maximum length of data (in bytes) that can be transmitted to the peer by the Nordic UART service module. */
/**@brief Connection parameters requested for connection. */
static ble_gap_conn_params_t const m_connection_param =
{
(uint16_t)MIN_CONNECTION_INTERVAL, // Minimum connection
(uint16_t)MAX_CONNECTION_INTERVAL, // Maximum connection
(uint16_t)SLAVE_LATENCY, // Slave latency
(uint16_t)SUPERVISION_TIMEOUT // Supervision time-out
};
/** @brief Parameters used when scanning. */
static ble_gap_scan_params_t const m_scan_params =
{
.active = 1,
.interval = SCAN_INTERVAL,
.window = SCAN_WINDOW,
.timeout = SCAN_TIMEOUT,
#if (NRF_SD_BLE_API_VERSION <= 2)
.selective = 0,
.p_whitelist = NULL,
#endif
#if (NRF_SD_BLE_API_VERSION >= 3)
.use_whitelist = 0,
#endif
};
/**@brief NUS uuid. */
static ble_uuid_t const m_nus_uuid =
{
.uuid = BLE_UUID_NUS_SERVICE,
.type = NUS_SERVICE_UUID_TYPE
};
/**@brief Function for asserts in the SoftDevice.
*
* @details This function will be called in case of an assert in the SoftDevice.
*
* @warning This handler is an example only and does not fit a final product. You need to analyze
* how your product is supposed to react in case of Assert.
* @warning On assert from the SoftDevice, the system can only recover on reset.
*
* @param[in] line_num Line number of the failing ASSERT call.
* @param[in] p_file_name File name of the failing ASSERT call.
*/
void assert_nrf_callback(uint16_t line_num, const uint8_t * p_file_name)
{
app_error_handler(0xDEADBEEF, line_num, p_file_name);
}
/**@brief Function to start scanning. */
static void scan_start(void)
{
ret_code_t ret;
ret = sd_ble_gap_scan_start(&m_scan_params);
APP_ERROR_CHECK(ret);
ret = bsp_indication_set(BSP_INDICATE_SCANNING);
APP_ERROR_CHECK(ret);
}
/**@brief Function for handling database discovery events.
*
* @details This function is callback function to handle events from the database discovery module.
* Depending on the UUIDs that are discovered, this function should forward the events
* to their respective services.
*
* @param[in] p_event Pointer to the database discovery event.
*/
static void db_disc_handler(ble_db_discovery_evt_t * p_evt)
{
ble_nus_c_on_db_disc_evt(&m_ble_nus_c[p_evt->conn_handle], p_evt);
}
/**@brief In du lieu nhan duoc tu nus cua per ra uart cua minh
*
* @details This function takes a list of characters of length data_len and prints the characters out on UART.
* If @ref ECHOBACK_BLE_UART_DATA is set, the data is sent back to sender.
*/
/* them uint16_t conn_handle_t de biet duoc per nao gui den */
static void ble_nus_chars_received_uart_print(uint8_t * p_data, uint16_t data_len , uint16_t conn_handle_t )
{
ret_code_t ret_val;
printf("\r\nReceiving data of conn_handle[0x%2x]\r\n",conn_handle_t);// conn_handle_t = 1,2....<-> (hex) 0,1,...,a,b,c,d,e,f..
NRF_LOG_HEXDUMP_DEBUG(p_data, data_len);
for (uint32_t i = 0; i < data_len; i++)
{
do
{
ret_val = app_uart_put(p_data[i]);
if ((ret_val != NRF_SUCCESS) && (ret_val != NRF_ERROR_BUSY))
{
NRF_LOG_ERROR("app_uart_put failed for index 0x%04x.", i);
APP_ERROR_CHECK(ret_val);
}
} while (ret_val == NRF_ERROR_BUSY);
}
if (p_data[data_len-1] == '\r')
{
while (app_uart_put('\n') == NRF_ERROR_BUSY);
}
/* if (ECHOBACK_BLE_UART_DATA) // gui tra lai du lieu nhan dc tu uart_nus cua per lên uart_nus cho per
{
// Send data back to peripheral.
do
{
ret_val = ble_nus_c_string_send(&m_ble_nus_c, p_data, data_len);
if ((ret_val != NRF_SUCCESS) && (ret_val != NRF_ERROR_BUSY))
{
NRF_LOG_ERROR("Failed sending NUS message. Error 0x%x. ", ret_val);
APP_ERROR_CHECK(ret_val);
}
} while (ret_val == NRF_ERROR_BUSY);
}
*/
}
/**@brief Function for handling app_uart events.
*
* @details This function will receive a single character from the app_uart module and append it to
* a string. The string will be be sent over BLE when the last character received was a
* 'new line' '\n' (hex 0x0A) or if the string has reached the maximum data length.
*/
void uart_event_handle(app_uart_evt_t * p_event)
{
static uint8_t data_array[BLE_NUS_MAX_DATA_LEN];
static uint16_t index = 0;
uint32_t ret_val;
switch (p_event->evt_type)
{
/**@snippet [Handling data from UART] */
case APP_UART_DATA_READY:
UNUSED_VARIABLE(app_uart_get(&data_array[index]));
index++;
if ((data_array[index - 1] == '@') || (index >= (m_ble_nus_max_data_len)))
{
NRF_LOG_DEBUG("Ready to send data over BLE NUS");
NRF_LOG_HEXDUMP_DEBUG(data_array, index);
do
{
for (uint32_t i = 0; i< TOTAL_LINK_COUNT; i++) // send to all
{
ret_val = ble_nus_c_string_send(&m_ble_nus_c[i], data_array, index); // can chinh sua
if ( (ret_val != NRF_ERROR_INVALID_STATE) && (ret_val != NRF_ERROR_BUSY) )
{
APP_ERROR_CHECK(ret_val);
}
}
}
while (ret_val == NRF_ERROR_BUSY);
index = 0;
}
break;
/**@snippet [Handling data from UART] */
case APP_UART_COMMUNICATION_ERROR:
NRF_LOG_ERROR("Communication error occurred while handling UART.");
APP_ERROR_HANDLER(p_event->data.error_communication);
break;
case APP_UART_FIFO_ERROR:
NRF_LOG_ERROR("Error occurred in FIFO module used by UART.");
APP_ERROR_HANDLER(p_event->data.error_code);
break;
default:
break;
}
}
/**@brief Callback handling NUS Client events.
*
* @details This function is called to notify the application of NUS client events.
*
* @param[in] p_ble_nus_c NUS Client Handle. This identifies the NUS client
* @param[in] p_ble_nus_evt Pointer to the NUS Client event.
*/
/**@snippet [Handling events from the ble_nus_c module] */
static void ble_nus_c_evt_handler(ble_nus_c_t * p_ble_nus_c, ble_nus_c_evt_t const * p_ble_nus_evt)
{
ret_code_t err_code;
switch (p_ble_nus_evt->evt_type)
{
case BLE_NUS_C_EVT_DISCOVERY_COMPLETE:
{
printf("Discovery complete.");
err_code = ble_nus_c_handles_assign(p_ble_nus_c, p_ble_nus_evt->conn_handle, &p_ble_nus_evt->handles);
APP_ERROR_CHECK(err_code);
err_code = ble_nus_c_tx_notif_enable(p_ble_nus_c); // cho phep peer gui thong bao, tuc la central san sang nhan data
APP_ERROR_CHECK(err_code);
printf("Connected to device with Nordic UART Service.");
} break;
case BLE_NUS_C_EVT_NUS_TX_EVT:
{
ble_nus_chars_received_uart_print(p_ble_nus_evt->p_data, p_ble_nus_evt->data_len, p_ble_nus_c->conn_handle); // in du lieu nhan duoc ra uart
} break;
case BLE_NUS_C_EVT_DISCONNECTED:
{
if (ble_conn_state_n_centrals() == 0)
{
bsp_board_leds_off();
printf("\r\nDisconnected all peripheral\r\n");
}
else
{
printf("\r\nDisconnected to peripheral[0x%2x]\r\n", p_ble_nus_evt->conn_handle);
}
scan_start();
}break;
}
}
/**@snippet [Handling events from the ble_nus_c module] */
/**
* @brief Function for shutdown events.
*
* @param[in] event Shutdown type.
*/
static bool shutdown_handler(nrf_pwr_mgmt_evt_t event)
{
ret_code_t err_code;
err_code = bsp_indication_set(BSP_INDICATE_IDLE);
APP_ERROR_CHECK(err_code);
switch (event)
{
case NRF_PWR_MGMT_EVT_PREPARE_WAKEUP:
// Prepare wakeup buttons.
err_code = bsp_btn_ble_sleep_mode_prepare();
APP_ERROR_CHECK(err_code);
break;
default:
break;
}
return true;
}
NRF_PWR_MGMT_HANDLER_REGISTER(shutdown_handler, APP_SHUTDOWN_HANDLER_PRIORITY);
/**@brief Doc ban tin quang cao va kiem tra xem uuid tim duoc co trong danh sach co san khong (o day la UUID cua dich vu NUS)
*
* @details The function is able to search for 16-bit, 32-bit and 128-bit service UUIDs.
* To see the format of a advertisement packet, see
* https://www.bluetooth.org/Technical/AssignedNumbers/generic_access_profile.htm
*
* @param[in] p_target_uuid The UUID to search for.
* @param[in] p_adv_report Pointer to the advertisement report.
*
* @retval true if the UUID is present in the advertisement report. Otherwise false
*/
static bool is_uuid_present(ble_uuid_t const * p_target_uuid,
ble_gap_evt_adv_report_t const * p_adv_report)
{
ret_code_t err_code;
ble_uuid_t extracted_uuid;
uint16_t index = 0;
uint8_t * p_data = (uint8_t *)p_adv_report->data;
while (index < p_adv_report->dlen)
{
uint8_t field_length = p_data[index];
uint8_t field_type = p_data[index + 1];
if ( (field_type == BLE_GAP_AD_TYPE_16BIT_SERVICE_UUID_MORE_AVAILABLE)
|| (field_type == BLE_GAP_AD_TYPE_16BIT_SERVICE_UUID_COMPLETE))
{
for (uint32_t i = 0; i < (field_length / UUID16_SIZE); i++)
{
err_code = sd_ble_uuid_decode(UUID16_SIZE,
&p_data[i * UUID16_SIZE + index + 2],
&extracted_uuid);
if (err_code == NRF_SUCCESS)
{
if (extracted_uuid.uuid == p_target_uuid->uuid)
{
return true;
}
}
}
}
else if ( (field_type == BLE_GAP_AD_TYPE_32BIT_SERVICE_UUID_MORE_AVAILABLE)
|| (field_type == BLE_GAP_AD_TYPE_32BIT_SERVICE_UUID_COMPLETE))
{
for (uint32_t i = 0; i < (field_length / UUID32_SIZE); i++)
{
err_code = sd_ble_uuid_decode(UUID32_SIZE,
&p_data[i * UUID32_SIZE + index + 2],
&extracted_uuid);
if (err_code == NRF_SUCCESS)
{
if ( (extracted_uuid.uuid == p_target_uuid->uuid)
&& (extracted_uuid.type == p_target_uuid->type))
{
return true;
}
}
}
}
else if ( (field_type == BLE_GAP_AD_TYPE_128BIT_SERVICE_UUID_MORE_AVAILABLE)
|| (field_type == BLE_GAP_AD_TYPE_128BIT_SERVICE_UUID_COMPLETE))
{
err_code = sd_ble_uuid_decode(UUID128_SIZE, &p_data[index + 2], &extracted_uuid);
if (err_code == NRF_SUCCESS)
{
if ( (extracted_uuid.uuid == p_target_uuid->uuid)
&& (extracted_uuid.type == p_target_uuid->type))
{
return true;
}
}
}
index += field_length + 1;
}
return false;
}
/**@brief Function for handling BLE events.
*
* @param[in] p_ble_evt Bluetooth stack event.
* @param[in] p_context Unused.
*/
static void ble_evt_handler(ble_evt_t const * p_ble_evt, void * p_context)
{
ret_code_t err_code;
ble_gap_evt_t const * p_gap_evt = &p_ble_evt->evt.gap_evt;
switch (p_ble_evt->header.evt_id)
{
case BLE_GAP_EVT_ADV_REPORT:
{
ble_gap_evt_adv_report_t const * p_adv_report = &p_gap_evt->params.adv_report;
if (is_uuid_present(&m_nus_uuid, p_adv_report)) // neu dung uuid co san cua NUS
{
err_code = sd_ble_gap_connect(&p_adv_report->peer_addr,
&m_scan_params,
&m_connection_param,
APP_BLE_CONN_CFG_TAG);
if (err_code == NRF_SUCCESS)
{
// scan is automatically stopped by the connect
err_code = bsp_indication_set(BSP_INDICATE_IDLE);
APP_ERROR_CHECK(err_code);
printf("\r\nConnecting to target %02x%02x%02x%02x%02x%02x\r\n",
p_adv_report->peer_addr.addr[0],
p_adv_report->peer_addr.addr[1],
p_adv_report->peer_addr.addr[2],
p_adv_report->peer_addr.addr[3],
p_adv_report->peer_addr.addr[4],
p_adv_report->peer_addr.addr[5]
);
}
}
}break; // BLE_GAP_EVT_ADV_REPORT
case BLE_GAP_EVT_CONNECTED:
{
printf("\r\nConnected to 0x%2x\r\n",p_gap_evt->conn_handle);
APP_ERROR_CHECK_BOOL(p_gap_evt->conn_handle < TOTAL_LINK_COUNT);
err_code = ble_nus_c_handles_assign(&m_ble_nus_c[p_gap_evt->conn_handle],p_gap_evt->conn_handle, NULL);
APP_ERROR_CHECK(err_code);
// err_code = bsp_indication_set(BSP_INDICATE_CONNECTED);
bsp_board_led_on(CENTRAL_CONNECTED_LED);
APP_ERROR_CHECK(err_code);
memset(&m_db_disc[p_gap_evt->conn_handle], 0x00, sizeof(ble_db_discovery_t));
// start discovery of services. The NUS Client waits for a discovery result
err_code = ble_db_discovery_start(&m_db_disc[p_gap_evt->conn_handle], p_gap_evt->conn_handle);
APP_ERROR_CHECK(err_code);
if (ble_conn_state_n_centrals() == CENTRAL_LINK_COUNT)
{
printf("\r\nFull connect\r\n");
bsp_board_leds_on();
}
else
{
scan_start();
}
} break;
case BLE_GAP_EVT_TIMEOUT:
{
if (p_gap_evt->params.timeout.src == BLE_GAP_TIMEOUT_SRC_SCAN)
{
NRF_LOG_INFO("Scan timed out.");
scan_start();
}
else if (p_gap_evt->params.timeout.src == BLE_GAP_TIMEOUT_SRC_CONN)
{
NRF_LOG_INFO("Connection Request timed out.");
}
} break;
case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
// Pairing not supported
err_code = sd_ble_gap_sec_params_reply(p_ble_evt->evt.gap_evt.conn_handle, BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP, NULL, NULL);
APP_ERROR_CHECK(err_code);
break;
case BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST:
// Accepting parameters requested by peer.
err_code = sd_ble_gap_conn_param_update(p_gap_evt->conn_handle,
&p_gap_evt->params.conn_param_update_request.conn_params);
APP_ERROR_CHECK(err_code);
break;
#if defined(S132)
case BLE_GAP_EVT_PHY_UPDATE_REQUEST:
{
NRF_LOG_DEBUG("PHY update request.");
ble_gap_phys_t const phys =
{
.rx_phys = BLE_GAP_PHY_AUTO,
.tx_phys = BLE_GAP_PHY_AUTO,
};
err_code = sd_ble_gap_phy_update(p_ble_evt->evt.gap_evt.conn_handle, &phys);
APP_ERROR_CHECK(err_code);
} break;
#endif
case BLE_GATTC_EVT_TIMEOUT:
// Disconnect on GATT Client timeout event.
NRF_LOG_DEBUG("GATT Client Timeout.");
err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gattc_evt.conn_handle,
BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
APP_ERROR_CHECK(err_code);
break;
case BLE_GATTS_EVT_TIMEOUT:
// Disconnect on GATT Server timeout event.
NRF_LOG_DEBUG("GATT Server Timeout.");
err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gatts_evt.conn_handle,
BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
APP_ERROR_CHECK(err_code);
break;
default:
break;
}
}
/**@brief Function for initializing the BLE stack.
*
* @details Initializes the SoftDevice and the BLE event interrupt.
*/
static void ble_stack_init(void)
{
ret_code_t err_code;
err_code = nrf_sdh_enable_request();
APP_ERROR_CHECK(err_code);
// Configure the BLE stack using the default settings.
// Fetch the start address of the application RAM.
uint32_t ram_start = 0;
err_code = nrf_sdh_ble_default_cfg_set(APP_BLE_CONN_CFG_TAG, &ram_start);
APP_ERROR_CHECK(err_code);
// Enable BLE stack.
err_code = nrf_sdh_ble_enable(&ram_start);
APP_ERROR_CHECK(err_code);
// Register a handler for BLE events.
NRF_SDH_BLE_OBSERVER(m_ble_observer, APP_BLE_OBSERVER_PRIO, ble_evt_handler, NULL);
}
/**@brief Function for handling events from the GATT library. */
void gatt_evt_handler(nrf_ble_gatt_t * p_gatt, nrf_ble_gatt_evt_t const * p_evt)
{
if (p_evt->evt_id == NRF_BLE_GATT_EVT_ATT_MTU_UPDATED)
{
NRF_LOG_INFO("ATT MTU exchange completed.");
m_ble_nus_max_data_len = p_evt->params.att_mtu_effective - OPCODE_LENGTH - HANDLE_LENGTH;
NRF_LOG_INFO("Ble NUS max data length set to 0x%X(%d)", m_ble_nus_max_data_len, m_ble_nus_max_data_len);
}
}
/**@brief Function for initializing the GATT library. */
void gatt_init(void)
{
ret_code_t err_code;
err_code = nrf_ble_gatt_init(&m_gatt, gatt_evt_handler);
APP_ERROR_CHECK(err_code);
err_code = nrf_ble_gatt_att_mtu_central_set(&m_gatt, NRF_SDH_BLE_GATT_MAX_MTU_SIZE);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for handling events from the BSP module.
*
* @param[in] event Event generated by button press.
*/
void bsp_event_handler(bsp_event_t event)
{
// ret_code_t err_code;
switch (event)
{
case BSP_EVENT_SLEEP:
nrf_pwr_mgmt_shutdown(NRF_PWR_MGMT_SHUTDOWN_GOTO_SYSOFF);
break;
// case BSP_EVENT_DISCONNECT:
// err_code = sd_ble_gap_disconnect(m_ble_nus_c.conn_handle,
// BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
// if (err_code != NRF_ERROR_INVALID_STATE)
// {
// APP_ERROR_CHECK(err_code);
// }
// break;
default:
break;
}
}
/**@brief Function for initializing the UART. */
static void uart_init(void)
{
ret_code_t err_code;
app_uart_comm_params_t const comm_params =
{
.rx_pin_no = RX_PIN_NUMBER,
.tx_pin_no = TX_PIN_NUMBER,
.rts_pin_no = RTS_PIN_NUMBER,
.cts_pin_no = CTS_PIN_NUMBER,
.flow_control = APP_UART_FLOW_CONTROL_DISABLED,
.use_parity = false,
.baud_rate = UART_BAUDRATE_BAUDRATE_Baud115200
};
APP_UART_FIFO_INIT(&comm_params,
UART_RX_BUF_SIZE,
UART_TX_BUF_SIZE,
uart_event_handle,
APP_IRQ_PRIORITY_LOWEST,
err_code);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing the NUS Client. */
static void nus_c_init(void)
{
ret_code_t err_code;
ble_nus_c_init_t init;
init.evt_handler = ble_nus_c_evt_handler;
for (uint8_t i = 0; i < TOTAL_LINK_COUNT; i++)
{
err_code = ble_nus_c_init(&m_ble_nus_c[i], &init);
APP_ERROR_CHECK(err_code);
}
// err_code = ble_nus_c_init(&m_ble_nus_c, &init);
// APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing buttons and leds. */
static void buttons_leds_init(void)
{
ret_code_t err_code;
bsp_event_t startup_event;
err_code = bsp_init(BSP_INIT_LED, bsp_event_handler);// su kien nut bam
APP_ERROR_CHECK(err_code);
err_code = bsp_btn_ble_init(NULL, &startup_event);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing the timer. */
static void timer_init(void)
{
ret_code_t err_code = app_timer_init();
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing the nrf log module. */
static void log_init(void)
{
ret_code_t err_code = NRF_LOG_INIT(NULL);
APP_ERROR_CHECK(err_code);
NRF_LOG_DEFAULT_BACKENDS_INIT();
}
/**@brief Function for initializing the Power manager. */
static void power_init(void)
{
ret_code_t err_code = nrf_pwr_mgmt_init();
APP_ERROR_CHECK(err_code);
}
/** @brief Function for the Power manager. */
static void power_manage(void)
{
ret_code_t err_code = sd_app_evt_wait();
APP_ERROR_CHECK(err_code);
}
/** @brief Function for initializing the Database Discovery Module. */
static void db_discovery_init(void)
{
ret_code_t err_code = ble_db_discovery_init(db_disc_handler);
APP_ERROR_CHECK(err_code);
}
int main(void)
{
log_init();
timer_init();
power_init();
uart_init();
buttons_leds_init();
db_discovery_init();
ble_stack_init();
gatt_init();
nus_c_init();
ble_conn_state_init();
// Start scanning for peripherals and initiate connection
// with devices that advertise NUS UUID.
printf("\r\nBLE UART central example started.\r\n");
NRF_LOG_INFO("BLE UART central example started.");
scan_start();
for (;;)
{
// if (NRF_LOG_PROCESS() == false)
// {
// nrf_pwr_mgmt_run();
// }
power_manage();
}
}