Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.34-ARCH (tobias@T-POWA-LX) (gcc version 4.5.0 (GCC) ) #1 SMP PREEMPT Mon May 17 09:29:00 CEST 2010
Command line: root=/dev/disk/by-uuid/2b4a1f62-5c4b-423e-8b1d-935e8988dbd1 ro nomodeset
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cff90000 (usable)
BIOS-e820: 00000000cff90000 - 00000000cffa8000 (ACPI data)
BIOS-e820: 00000000cffa8000 - 00000000cffd0000 (ACPI NVS)
BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000128000000 (usable)
NX (Execute Disable) protection: active
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x128000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000130000000 aka 4864M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcff90 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009ec00 (usable)
modified: 000000000009ec00 - 00000000000a0000 (reserved)
modified: 00000000000e4000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000cff90000 (usable)
modified: 00000000cff90000 - 00000000cffa8000 (ACPI data)
modified: 00000000cffa8000 - 00000000cffd0000 (ACPI NVS)
modified: 00000000cffd0000 - 00000000d0000000 (reserved)
modified: 00000000ff700000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000128000000 (usable)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000ff780] ff780
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000cff90000
0000000000 - 00c0000000 page 1G
00c0000000 - 00cfe00000 page 2M
00cfe00000 - 00cff90000 page 4k
kernel direct mapping tables up to cff90000 @ 16000-19000
init_memory_mapping: 0000000100000000-0000000128000000
0100000000 - 0128000000 page 2M
kernel direct mapping tables up to 128000000 @ 18000-1a000
RAMDISK: 37e1a000 - 37ff0000
ACPI: RSDP 00000000000fb4e0 00024 (v02 ACPIAM)
ACPI: XSDT 00000000cff90100 0005C (v01 041510 XSDT1115 20100415 MSFT 00000097)
ACPI: FACP 00000000cff90290 000F4 (v03 041510 FACP1115 20100415 MSFT 00000097)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 (20100121/tbfadt-557)
ACPI: DSDT 00000000cff90450 0DDCE (v01 A1392 A1392001 00000001 INTL 20060113)
ACPI: FACS 00000000cffa8000 00040
ACPI: APIC 00000000cff90390 0007C (v01 041510 APIC1115 20100415 MSFT 00000097)
ACPI: MCFG 00000000cff90410 0003C (v01 041510 OEMMCFG 20100415 MSFT 00000097)
ACPI: OEMB 00000000cffa8040 00072 (v01 041510 OEMB1115 20100415 MSFT 00000097)
ACPI: SRAT 00000000cff9f450 000E8 (v03 AMD FAM_F_10 00000002 AMD 00000001)
ACPI: HPET 00000000cff9f540 00038 (v01 041510 OEMHPET 20100415 MSFT 00000097)
ACPI: SSDT 00000000cff9f580 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea00041fffff] PMD -> [ffff880002000000-ffff8800057fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00128000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x000cff90
0: 0x00100000 -> 0x00128000
On node 0 totalpages: 1015582
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3926 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 833480 pages, LIFO batch:31
Normal zone: 2240 pages used for memmap
Normal zone: 161600 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
SMP: Allowing 6 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
early_res array is doubled to 64 at [19200 - 199ff]
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
PM: Registered nosave memory: 00000000cff90000 - 00000000cffa8000
PM: Registered nosave memory: 00000000cffa8000 - 00000000cffd0000
PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000ff700000
PM: Registered nosave memory: 00000000ff700000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:2f700000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880001800000 s88104 r8192 d22488 u262144
pcpu-alloc: s88104 r8192 d22488 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 999006
Kernel command line: root=/dev/disk/by-uuid/2b4a1f62-5c4b-423e-8b1d-935e8988dbd1 ro nomodeset
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ c000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
early_res array is doubled to 128 at [19a00 - 1a9ff]
Subtract (60 early reservations)
#1 [0001000000 - 00016df178] TEXT DATA BSS
#2 [0037e1a000 - 0037ff0000] RAMDISK
#3 [00016e0000 - 00016e0340] BRK
#4 [00000ff790 - 0000100000] BIOS reserved
#5 [00000ff780 - 00000ff790] MP-table mpf
#6 [000009ec00 - 00000f0900] BIOS reserved
#7 [00000f0a6c - 00000ff780] BIOS reserved
#8 [00000f0900 - 00000f0a6c] MP-table mpc
#9 [0000010000 - 0000012000] TRAMPOLINE
#10 [0000012000 - 0000016000] ACPI WAKEUP
#11 [0000016000 - 0000018000] PGTABLE
#12 [0000018000 - 0000019000] PGTABLE
#13 [00016e0340 - 00016e1340] BOOTMEM
#14 [0000019000 - 00000191f0] BOOTMEM
#15 [0001ee2000 - 0001ee3000] BOOTMEM
#16 [0001ee3000 - 0001ee4000] BOOTMEM
#17 [0002000000 - 0005800000] MEMMAP 0
#18 [00016e1340 - 00016f9340] BOOTMEM
#19 [00016f9340 - 0001711340] BOOTMEM
#20 [0001711340 - 0001729340] BOOTMEM
#21 [000172a000 - 000172b000] BOOTMEM
#22 [00016df180 - 00016df1c1] BOOTMEM
#23 [00016df200 - 00016df243] BOOTMEM
#24 [00016df280 - 00016df4b0] BOOTMEM
#25 [00016df4c0 - 00016df528] BOOTMEM
#26 [00016df540 - 00016df5a8] BOOTMEM
#27 [00016df5c0 - 00016df628] BOOTMEM
#28 [00016df640 - 00016df6a8] BOOTMEM
#29 [00016df6c0 - 00016df728] BOOTMEM
#30 [00016df740 - 00016df7a8] BOOTMEM
#31 [00016df7c0 - 00016df828] BOOTMEM
#32 [00016df840 - 00016df8a8] BOOTMEM
#33 [00016df8c0 - 00016df928] BOOTMEM
#34 [00016df940 - 00016df960] BOOTMEM
#35 [00016df980 - 00016df9a0] BOOTMEM
#36 [00016df9c0 - 00016dfa09] BOOTMEM
#37 [00016dfa40 - 00016dfa89] BOOTMEM
#38 [0001800000 - 000181d000] BOOTMEM
#39 [0001840000 - 000185d000] BOOTMEM
#40 [0001880000 - 000189d000] BOOTMEM
#41 [00018c0000 - 00018dd000] BOOTMEM
#42 [0001900000 - 000191d000] BOOTMEM
#43 [0001940000 - 000195d000] BOOTMEM
#44 [00016dfac0 - 00016dfac8] BOOTMEM
#45 [00016dfb00 - 00016dfb08] BOOTMEM
#46 [00016dfb40 - 00016dfb58] BOOTMEM
#47 [00016dfb80 - 00016dfbb0] BOOTMEM
#48 [00016dfbc0 - 00016dfce0] BOOTMEM
#49 [00016dfd00 - 00016dfd48] BOOTMEM
#50 [00016dfd80 - 00016dfdc8] BOOTMEM
#51 [000172b000 - 0001733000] BOOTMEM
#52 [000195d000 - 0001d5d000] BOOTMEM
#53 [0005800000 - 0005a00000] BOOTMEM
#54 [0020000000 - 0024000000] BOOTMEM
#55 [00016dfe00 - 00016dfe20] BOOTMEM
#56 [0005a00000 - 0009a00000] BOOTMEM
#57 [0001733000 - 0001753000] BOOTMEM
#58 [0001753000 - 0001793000] BOOTMEM
#59 [000001aa00 - 0000022a00] BOOTMEM
Memory: 3857352k/4849664k available (3481k kernel code, 787336k absent, 204976k reserved, 1790k data, 480k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:768
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 40632320 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3013.688 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6029.50 BogoMIPS (lpj=10045613)
Security Framework initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
using C1E aware idle routine
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
ACPI: Core revision 20100121
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X4 945 Processor stepping 02
System has AMD C1E enabled
Switch to broadcast mode on CPU0
Booting Node 0, Processors #1
Switch to broadcast mode on CPU1
#2
Switch to broadcast mode on CPU2
#3
Brought up 4 CPUs
Switch to broadcast mode on CPU3
Total of 4 processors activated (24117.96 BogoMIPS).
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [e0000000, efffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
node 0 link 0: mmio [f0000000, fe8fffff]
node 0 link 0: mmio [fe900000, feafffff]
node 0 link 0: mmio [feb00000, ffefffff]
TOM2: 0000000130000000 aka 4864M
bus: [00, 07] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
bus: 00 index 3 [mem 0xf0000000-0xffffffff]
bus: 00 index 4 [mem 0x130000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
pci 0000:00:11.0: reg 24: [mem 0xfe8ffc00-0xfe8fffff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: reg 10: [mem 0xfe8fe000-0xfe8fefff]
pci 0000:00:12.1: reg 10: [mem 0xfe8fd000-0xfe8fdfff]
pci 0000:00:12.2: reg 10: [mem 0xfe8ff800-0xfe8ff8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: reg 10: [mem 0xfe8fc000-0xfe8fcfff]
pci 0000:00:13.1: reg 10: [mem 0xfe8fb000-0xfe8fbfff]
pci 0000:00:13.2: reg 10: [mem 0xfe8ff400-0xfe8ff4ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
pci 0000:00:14.2: reg 10: [mem 0xfe8f4000-0xfe8f7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.5: reg 10: [mem 0xfe8fa000-0xfe8fafff]
pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
pci 0000:01:05.0: reg 14: [io 0xd000-0xd0ff]
pci 0000:01:05.0: reg 18: [mem 0xfeaf0000-0xfeafffff]
pci 0000:01:05.0: reg 24: [mem 0xfe900000-0xfe9fffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfeafffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff]
pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
pci 0000:02:00.0: reg 30: [mem 0xfebf0000-0xfebfffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *4 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009ec00 - 000000000009ffff
reserve RAM buffer: 00000000cff90000 - 00000000cfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: [io 0x040b] has been reserved
system 00:09: [io 0x04d6] has been reserved
system 00:09: [io 0x0c00-0x0c01] has been reserved
system 00:09: [io 0x0c14] has been reserved
system 00:09: [io 0x0c50-0x0c51] has been reserved
system 00:09: [io 0x0c52] has been reserved
system 00:09: [io 0x0c6c] has been reserved
system 00:09: [io 0x0c6f] has been reserved
system 00:09: [io 0x0cd0-0x0cd1] has been reserved
system 00:09: [io 0x0cd2-0x0cd3] has been reserved
system 00:09: [io 0x0cd4-0x0cd5] has been reserved
system 00:09: [io 0x0cd6-0x0cd7] has been reserved
system 00:09: [io 0x0cd8-0x0cdf] has been reserved
system 00:09: [io 0x0b00-0x0b3f] has been reserved
system 00:09: [io 0x0800-0x089f] has been reserved
system 00:09: [io 0x0b00-0x0b0f] has been reserved
system 00:09: [io 0x0b20-0x0b3f] has been reserved
system 00:09: [io 0x0900-0x090f] has been reserved
system 00:09: [io 0x0910-0x091f] has been reserved
system 00:09: [io 0xfe00-0xfefe] has been reserved
system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:0a: [io 0x0230-0x023f] has been reserved
system 00:0a: [io 0x0290-0x029f] has been reserved
system 00:0a: [io 0x0300-0x030f] has been reserved
system 00:0a: [io 0x0a30-0x0a3f] has been reserved
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x000c0000-0x000cffff] has been reserved
system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0c: [mem 0x00100000-0xcfffffff] could not be reserved
system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfeafffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03-03]
pci 0000:00:14.4: bridge window [io disabled]
pci 0000:00:14.4: bridge window [mem disabled]
pci 0000:00:14.4: bridge window [mem pref disabled]
pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:0a.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
pci 0000:01:05.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1880k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1277047525.643:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7666
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:0a.0: setting latency timer to 64
pcieport 0000:00:0a.0: irq 24 for MSI/MSI-X
pcieport 0000:00:0a.0: Requesting control of PCIe PME from ACPI BIOS
pcieport 0000:00:0a.0: Failed to receive control of PCIe PME service: no _OSC support
pcie_pme: probe of 0000:00:0a.0:pcie01 failed with error -13
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 480k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd00 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd80 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe80 irq 22
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: ST3500320AS, SD1A, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100
ata1.00: configured for UDMA/133
ata3.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA ST3500320AS SD1A PQ: 0 ANSI: 5
scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10 EL00 PQ: 0 ANSI: 5
pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_acpi 0000:00:14.1: setting latency timer to 64
scsi4 : pata_atiixp
scsi5 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
ata5.00: ATA-6: WDC WD2500SB-01KBC0, 08.02D08, max UDMA/100
ata5.00: 488397168 sectors, multi 16: LBA48
ata5.00: configured for UDMA/100
scsi 4:0:0:0: Direct-Access ATA WDC WD2500SB-01K 08.0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 4:0:0:0: [sdb] Attached SCSI disk
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (sda3): mounted filesystem with ordered data mode
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
udev: starting version 151
fuse init (API version 7.13)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: irq 25 for MSI/MSI-X
r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc900101a0000, 90:e6:ba:bd:61:aa, XID 083000c0 IRQ 25
ACPI: WMI: Mapper loaded
EDAC MC: Ver: 2.1.0 May 17 2010
EDAC amd64_edac: Ver: 3.3.0 May 17 2010
EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
amd64_edac: probe of 0000:00:18.2 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 2:0:0:0: Attached scsi generic sg1 type 5
sd 4:0:0:0: Attached scsi generic sg2 type 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe8ff800
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe8ff400
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe8fe000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0x0b00-0x0b0f 64bit]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe8fd000
powernow-k8: Found 1 AMD Phenom(tm) II X4 945 Processor processors (4 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (3000 MHz)
powernow-k8: 1 : pstate 1 (2300 MHz)
powernow-k8: 2 : pstate 2 (1800 MHz)
powernow-k8: 3 : pstate 3 (800 MHz)
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe8fc000
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 4 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa0200540
vboxdrv: fAsync=0 offMin=0x399 offMax=0x5883
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.2.4 (interface 0x00140001).
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe8fb000
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe8fa000
[drm] Initialized drm 1.1.0 20060810
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
[drm] VGACON disable radeon kernel modesetting.
pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:01:05.0: setting latency timer to 64
[drm] Initialized radeon 1.33.0 20080528 for 0000:01:05.0 on minor 0
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
usb 4-3: new low speed USB device using ohci_hcd and address 2
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 3673 MBytes.
[fglrx] vendor: 1002 device: 9710 count: 1
[fglrx] ioport: bar 1, base 0xd000, size: 0x100
pci 0000:01:05.0: setting latency timer to 64
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 8.74.4 [May 27 2010] with 1 minors
usbcore: registered new interface driver hiddev
input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input3
generic-usb 0003:045E:0084.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:12.1-3/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
EXT4-fs (sda4): mounted filesystem with ordered data mode
Adding 2096476k swap on /dev/sda2. Priority:-1 extents:1 across:2096476k
r8169 0000:02:00.0: eth0: link up
r8169 0000:02:00.0: eth0: link up
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
it87: Found IT8712F chip at 0x290, revision 8
it87: VID is disabled (pins used for GPIO)
it87: in3 is VCC (+5V)
it87: in7 is VCCH (+5V Stand-By)
it87: Beeping is supported
ACPI: resource it87 [io 0x0295-0x0296] conflicts with ACPI region SIOE [irq 656-687]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[fglrx] GART Table is not in FRAME_BUFFER range
[fglrx] Could not enable MSI; System prevented initialization
[fglrx] Firegl kernel thread PID: 3234
[fglrx] IRQ 18 Enabled
[fglrx] Gart USWC size:1200 M.
[fglrx] Gart cacheable size:475 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:bffb000, size:5000
eth0: no IPv6 routers present